savage 110BA replacement barrels, bolts, lugs

[ghostwriter]

Does anyone know where I might find a replacement barrel (338 Lapua) w/muzzle brake, a bolt for it, and the recoil lug as a complete package for my 110 BA? I've tried to contact Savage and I keep getting the runaround. It seems no-one knows what to do.
thanks in advance
db

[bootsmcguire]

I just have to ask... why?

Curiosity is getting the best of me. :D

EDIT: after I posted this I realized you must have the 300WM and wanna go switch-barrel to the 338 Lapua. My original thought was you had a 338L gun and had shot out the barrel or had a mechanical problem with the bolt or something. I don't know where my mind was. I guess looking at 3 differnet webpages and watching TV all at the same time wasn't a good idea. :P

[ghostwriter]

well, here's the cut and dried answer to your question... I can't afford another $1,700-$2,000 for a rifle, and another $2K for a scope and another $200 for a Pelican case, so i figured I'd be a considerably amount of cash ahead if I just got the barrel/brake, bolt, and recoil lug and with the supplied wrench they give you, swap as required. The best of a 2-rifle world don't you think?

db

[scope eye]

Hi send your barrel to a barrel maker let them take measurements and have them make one of the caliber you want.
Dean

[memilanuk]

As much as we the consumer might like it, I don't think thats going to happen any time soon. AFAIK, Savage as a company doesn't officially condone the end user taking their guns apart much beyond taking the bolt out and the stock off for cleaning purposes. They might be aware of what some of us do to their guns ;D but it doesn't mean they want anything to do with the liability that might ensue. Getting replacement barrels is tough enough for the factory team; it took a fair amount of wrangling and twisting the arms of the legal dept and such. Getting them to sell the parts to the customers for the sake of *not* buying another gun... well, they are in the business of selling guns, not spare parts, like it or not.

I'd second the advice to get an aftermarket barrel & brake. You don't need a second recoil lug anyways; just keep using the original. Buy a set of headspace gauges from Midway or Brownell's.

[xr650rRider]

Since you have the .300 Win Mag version, I don't think the .338 Lapua version bolt would work anyway. It's my understanding the the .338 Lapua version uses a different action/bolt. Not saying you couldn't modify what you have to shoot .338 Lapua but some folks don't think it is safe to do so.

[ghostwriter]

Gentlemen,

@xr650rRider: I have no intention of modifying anything. I simple wanted a .338 chambered barrel, muzzle brake, AND BOLT, to switch my 110 BA over to the bigger caliber. There are no difference between the two rifles other than the items I have mentioned. I agree that Savage doesn't condone the "home gunsmithing" of their arms but this is listed as a LE rifle, available to general public until such time that they decide to sign a contract with the military and pull it from our reach.
Since they make a .338 barrel, brake, AND BOLT for the 110 BA chassis, I wanted to find a source to replace mine. In this way I can simply unscrew the 300 win mag barrel, removing the bolt and replacing those items with the secondary barrel and thus shoot the 338 L from the same chassis. This should take all of 3-5 minutes to do.
@memilanuk: As to the matter of Savage in the business to sell complete rifles and not parts, I beg to differ. The fact that the consumer can buy misc. parts for a BIG list of Savage arms proves that. The content of your remark makes me think you might have inside knowledge of Savage since you implied (I think) that you knew how hard it was to get them for YOUR team. They don't need to know or even care that my purpose is to build another rifle. All they need to know is I would like to buy a barrel/brake, bolt, and related items as required to swap them out.
@ scope eye: I really don't think a barrel maker can make a replacement exact as Savage does. That's not an option.

[Blue Avenger]

SAVAGE WILL NOT SELL YOU A BARREL. There team is the only ones I am aware of that have ever gotten just a barrel out of savage. Otherwise the only way barrels leave savage is attached to a new action or warranty replacement in the same caliber the rifle was built in. Licensed gun smiths do not get barrels from savage.

Northlander buys some rifles and parts them out, you could check with him. A take off is the only way your touching just a barrel.

nope a barrel maker can not make an exact copy of a savage, BUT they can make an exact copy of the outside of a savage, or they should find a new job.

[efm77]

I haven't seen the 300 win mag version of the 110BA so I'm not sure, but is it really the same as the 338 Lapua action? Is it the large shank action like the Lapua? Does it have the small ejection port that makes it stiffer like the Lapua? Sharpshooter Supply has said in the past that they have talked to the engineers at Savage and the receiver for the Lapua undergoes a different heat treatment process as well that makes it harder/stronger too to handle the increased rearward thrust of the big Lapua cartridge. So I'm wondering if the 300 win mag version is heat treated the same as the Lapua also?

[ghostwriter]

well, since I can't speak directly to a 'smith' at Savage, I couldn't say for sure if the heat treat is different, I was told by another shooter that the rifles chassis are identical, so, unless shown otherwise or told that it was different by Savage personnel I'd have to say they are the same. He took the .300 Win Mag barrel and bolt and put them on his rifle that was a .338 L prior.
Thanks so much to all of you for your input.
db

[memilanuk]

As to the matter of Savage in the business to sell complete rifles and not parts, I beg to differ. The fact that the consumer can buy misc. parts for a BIG list of Savage arms proves that.

Think what you want; it doesn't change their business policies one whit. They generally *don't* sell parts directly to the end user. If you call them up and ask for any piece that is even remotely involved in the actual process of making the gun go 'bang', they will likely state that they can only sell such items to gunsmiths w/ an FFL. Sometimes people manage to wriggle around that by saying 'oh, of course I'll take it right over to my local gunsmith to have him install it for me ::) ' but 9 times out of 10, they won't sell those parts to the consumer. You might be able to get those parts from Midway USA or Brownells or Numrich, but even then they may get finicky about some parts (not just the receiver) requiring an FFL to purchase, mainly due to liability.

[dcloco]

Generally, when you buy a "package" anything, one or more of the items is probably on the lower end of cost/quality in the overall picture. This is where they make their money.

You would be better off to pick and choose the quality that you want to put in your build(s).

I am NOT saying that a least expensive anything won't shoot just as the other end of the spectrum, but quality is quality.

[sinman]

I would say that the barrel shank and bolt are different between the 300wm and 338L in the 110BA. I don't have the 2 in front of me but I would bet money that you can't take a factory 338L barrel and screw it into your 300wm action. What you could do if you want a 338 barrel is get an aftermarket one made in 338 edge. Just a thought.

[ghostwriter]

I chatted with Jon over at Savage-barrels and he's under the opinion these use the same bolt face, so I'm checking into that end of tomorrow. These chassis are the exact same chassis no matter the caliber, in fact the barrels are the same (just a different chamber) and the brake is different having a slightly larger hole for the .038" bigger bullet. This isn't as difficult as a lot of people tend to make it, and as far as getting a smith locally with a FFL to buy it for me, NO problem. I'm just trying to get the source... I'll take care of the details as the come along. As far as package deal accuracy, if I can get a .338 chambered barrel as good as this factory one, I'll be more than happy. This .300 win mag shoots under a 3" group at 550 yards currently and at a 100 it's just under .5 MOA capable. This rifle currently shoots better than I can, so things turn out equally in the future with the barrel swap, I'll be a real happy camper.
Thanks everyone again for your replies and support.

db

[memilanuk]

I chatted with Jon over at Savage-barrels and he's under the opinion these use the same bolt face

Seeing as how the .300WM uses a .532 ('standard' magnum bolt face) and the .338LM uses a .588... I'd say you might want to talk with someone else who's actually used one.


As far as package deal accuracy, if I can get a .338 chambered barrel as good as this factory one, I'll be more than happy.

Now thats funny... :D As much as I like the way the factory barrels shoot... lets just say if you ever get a chance to look thru one with a bore scope, you'll see that they shoot well *in spite* of some of the factory processes. Pretty much any quality PT&C aftermarket barrel from a 'name' brand barrel maker should shoot at least as well as the factory tubes. Of course, you might actually have to clean it with something more sophisticated than a bore-snake to tell the difference... ::)

[sinman]

The338 lapua bolt face is not the same as the 300 win mag bolt face, if your barrel supplier doesn't know that they shouldn't be supplying the barrels. The rest of it I don't know for sure as I don't have one on had but the bolt face is a fact.

[memilanuk]

Got an email back from the guys @ Savage... the part numbers for both the receiver and the center section of the stock (where the mag fits) are the same on both the .300WM and the .338LM. The only difference is the bolt head (and possibly the magazine; didn't ask about that).

[xr650rRider]

There is a .338 Lapua bolt head on clearance at Midway.

http://www.midwayusa.com/viewproduct/?productnumber=927768

Just need a barrel now.

[ghostwriter]

The338 lapua bolt face is not the same as the 300 win mag bolt face, if your barrel supplier doesn't know that they shouldn't be supplying the barrels. The rest of it I don't know for sure as I don't have one on had but the bolt face is a fact.


Well, honestly I don't know the credentials or qualifications of Jon at Savage-barrels.com but it appears he's a paid sponsor here, so any comments as to his abilities and knowledge should probably be addressed directly to them, or him. Sorry, I can't speak for them myself, as I just met Jon in a very brief e-mail exchange about my quest.
@xr650rRider: That's a good start I guess, now all I need is a bolt to put it on. LOL Thanks for bird-dogging this out for me, at least I have some pathways to followup on.

@memilanuk: WOW, direct email contact with someone at Savage. How did you do it? I've been trying to find an email address for weeks now. The best I could do was google search Darrel's email address up in Oregon who was and is a shooter on the team. Care to share that info with me, how about a phone number? Also, the mags are identical... and made by Accuracy International for the Arctic Warefare rifle series, in .338 L caliber. Funny thing huh.

Thanks

[memilanuk]

@memilanuk: WOW, direct email contact with someone at Savage. How did you do it? I've been trying to find an email address for weeks now. The best I could do was google search Darrel's email address up in Oregon who was and is a shooter on the team.


Might have something to do with being on the same factory-sponsored F-TR team as Darrell, and that we field-tested the .338LM model for Savage and gave them a fair amount of feed back on same. I'm certainly not privy to everything that goes on on the other side of the country, but I do have certain contacts I can poke/prod when I need answers ;)

As for phone #s and email addresses... not sure they want that sort of thing handed out freely on the interweb, or they'd probably put the company directory on the web site ;). If you call the customer support number, you might ask for Patty Mercik (Sales) or Bill Dermody (Marketing).