LRPV 3 screw receiver

[sew0177]

I am changing the HS stock off my LRPV with a stockade stock. This stock was not original ordered with the middle receiver screw. Does this receiver need 3 action screws? It would be simple enough to fill in the mag void and drill a hole.

[pdog06]

No, it doesnt need it. My friend and I have taken a few LRPV barreled actions and put them into 2-pillar centerfeed stocks and they work perfect. He tested another one today as a matter of fact.
Just make sure the screw spacing on the Stockade stock is 4.400" for a centerfeed action and it will work.

However if you want the middle pillar it is pretty easy to do.