View Full Version : Bolt Extractor Parts
Delaware_Ken
03-07-2011, 08:25 PM
Good Evening
While I was lubing up my Savage bolt, I applied a little downward pressure on the extractor and it came out of the bolt, and some parts went flying out. I looked all over for the parts, but had no luck finding them. Does anyone have an idea what parts I will need to replace, and where I can find them.
Not a good Day, Ken
drybean
03-07-2011, 08:39 PM
extractor,spring & detent ball
drybean
jglover_81
03-07-2011, 08:42 PM
They all should be available at midway. There are three parts the extractor, the spring, and a ball bearing. If you need part #'s I can get em for you
sha-ul
03-08-2011, 01:29 AM
I really hate it when parts launch themselves. ( I did it too so don't feel lonely)
stumpjumper400
03-08-2011, 08:59 AM
just a though....are we sure he's not talking about the ejector vs the extractor? i don't know how the ejector would come out like that but i guess it's possible if it broke in half.
Delaware_Ken
03-08-2011, 10:31 AM
No, it's the extractor. I just did a quick check on the Savage site, and found the parts with their parts finder. Thank's for the info, I think I'm good to go until urf up something else.
Ken
Cover Dog
03-08-2011, 03:02 PM
Assemble or dis-assemble in a zip lock bag. How do I know, I just launched two bearings and the spring from a rear baffle. I was lucky, I found everything.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.