Action Screw Help 10fp

[sst04]

I need a new front action screw for my 10fp because the hex is rounding out. Savage has them listed on their website under the parts finder, but no part number.

I need a few things from Midway and I saw in the magazine they send out that they have a few listed for the Model 10/110. Question is which one will work, if any.

The ones they list are for H-S stock or for the laminate stock. I have the Tupperware stock. Which of these will work? Neither website(midway or Savage) has the Length listed.
The part number for the front screw on Midway is 665-114 for the HS stock, for the Laminate it is 128-515.
Thanks

[dwm]

Buy 2 of each, sooner or later you will use them all! ;D

Seriously, they are what $1 each? ;)

[sst04]

Buy 2 of each, sooner or later you will use them all! ;D

Seriously, they are what $1 each? ;)





I could do that, but was wanting to know if at least one of them would work. ;D

[ellobo]

Measure the length under the head then go to the hardware store and get a couple. Buy them longer and cut to length.
El Lobo

[dwm]

SSS or Northlander, etc. can tell you which one and sell you one ...

[jonbearman]

Try Kevin Rayhill at stockade stocks.He is fun to deal with.

[GaCop]

+1 what "ellobo' said. You can get 1/4X28 socket head bolts at Ace and cut them to length your self. The ones from Ace are of a harder steel too.