Large shank/small shank

[cobra hunter]

Hi all, How do you know if you have a large shank or small shank. Are they caliber specific or model#.

Thanks in advance.

[fatdaddy]

Cobra Hunter

Target and LRPV models will be large shank, others too, such as some mags. large shank barrels will have a step in the barrel at the nut where it gets bigger. Small shank will have no step at the nut. Bill

[cowboyarcher]

Measure the length of the barrel nut:

5/8" is a Large shank
7/8" is a Small shank

Adam

[pdog06]

http://i158.photobucket.com/albums/t106/pdog06_photos/Shank03.jpg

small shank is on the left. large shank is on the right.

[Fjold]

Pdog shows it easiest, I just look for the step in the barrel.

[cobra hunter]

Okay, Will the step up be butting up against the receiver. All of my Savages have a step up at the receiver but I don't know if I am looking at the right thing.

[cobra hunter]

Can somebody post a pic of a small shank barrel where it threads into the receiver.

[pdog06]

Can somebody post a pic of a small shank barrel where it threads into the receiver.


I already did, along with a large shank one. Those threads shown are the ones that thread into the action. The step-down in the barrel contour should be right after the barrel nut.

heres a pic of one of my small shank guns.. Notice it is smooth(no step down) after the barrel nut.

http://i158.photobucket.com/albums/t106/pdog06_photos/DSCN4520.jpg

The only thing is that SOME 1" bull barrels that are large shank will not have this "step-down" after the barrel nut. Atleast my 6br doesnt.

If you measure the length of your barrel nut it will also tell you, as was mentioned above.

[cobra hunter]

I got it now. I have all small shanks.

Thanks to all. :)