PDA

View Full Version : 22-250, 220 swift, and 243 win



Pages : [1] 2

keeki
02-15-2011, 06:51 AM
hey guys,
what i would like to do is narrow these three calibers down to one powder. I shoot 50gr vmax in the .22's and 70gr blitzking in the 243. I get to looking at all those numbers in the books and my eyes cross,lol. 4064, 414, varget, power pro 2000? The .22's have 26" barrels and the 243 has a 22" barrel. any help would be appreciated.

Uncle Jack
02-15-2011, 07:02 AM
I've shot 55 grainers with 4064 in every 220 Swift and 22/250 I've owned over the last 50 years and have never been dissapointed with the accuracy.

uj

trappst
02-15-2011, 10:38 AM
Add another vote for IMR 4064 Great in the Swift, good in the 22-250 and good in the 243 with 70g'ers

Luckus
02-15-2011, 11:29 AM
Been using 4064 with 40-55 gr bullets for years in my Swifts, accuracy and downrange performance always excellent.

scope eye
02-15-2011, 12:11 PM
Hi my personal preference for the 22-250 and the swift with 50g vmax's is 38gr of varget for both, and as far as they 243 with 70g pills I have had good consistency with 42gr of varget.
as always reloaders beware.
Thanks Dean

keeki
02-15-2011, 01:52 PM
was leaning toward 4064 or varget, its just that varget gets tough to get at times

scope eye
02-15-2011, 02:46 PM
Here ya go IMR 4895 same recipes as varget and easy to find H4895 3% less powder in the same application.
reloaders beware
Dean

bootsmcguire
02-15-2011, 07:54 PM
Can't speak for the 220 Swift, but in 22-250 and 243 Varget is my go-to powder. My #1 Choice in 243 and my #2 in 22-250 (but only because I have plenty of RL15 stocked up for the 22-250). RL15 has also done well when I have tried it in 243 with the lighter bullets. I would be running Varget in the 22-250 but when varget got scarce I stocked up on RL15 and it has been just as good to me.

scope eye
02-19-2011, 04:33 PM
Hey another good load for the 243 is 58gr vmax's with a healthy 45gr of varget, that will show those varmint's who's at the top of the food chain.

bootsmcguire
02-19-2011, 10:04 PM
+1 with Scope Eye. Thats pretty much the load I am running in my 243AI. Shoots like a laser. Easy to get .5 MOA with it in mine. I know I could run it faster in the 243AI vs the 243, but 4000+ FPS is fast enough for me ;D.

Blue Avenger
02-19-2011, 10:53 PM
Not that it is better then Varget, but 4064 is cheaper and easier to get. Varget seem to be the first to get scarce.

keeki
02-20-2011, 07:09 AM
i went with Imr4064, made some 220 loads last night and gonna check them out today. 4064 is always on the shelf and when you live in small town usa availability is important.

scope eye
02-20-2011, 03:54 PM
Since your guy Carry's IMR when I can't get my hands on varget, I use IMR4895 and use the same load data as varget.

keeki
02-20-2011, 09:25 PM
shot the 220 today. 39.3gr of imr4064 shot .3" groups @ 100yds at 4100fps. velocity bounced around a little until i fouled the barrel good. 4065-4125 but it finally settled down.

Luckus
02-22-2011, 11:31 AM
Sounds like you found the right combo. They're a hoot.

Predator1
02-23-2011, 06:23 PM
4064 is the stuff! I use it in my 22-250 and my 243.

MatthewUSMC8791
04-19-2011, 08:38 PM
.243 i use IMR-4350 @ 47.0grs and im using 70gr SMK and hitting 3700fps... no pressure in my remington 700

Luckus
04-22-2011, 01:24 PM
I read somewhere that Varget is basically short cut 4064.

Damon
04-22-2011, 01:54 PM
i use benchmark in my 22-250,with 52 grain bullets,and 70 grain bullets in my 243,i have also used benchmark in 308 and to me nothing compares to it.

Blue Avenger
04-22-2011, 02:14 PM
4064 would be my main choice, but I do have the others also.