Help Needed with SSS Trigger

[w123driver]

I posted this elsewhere, but looks I should have posted here. I am having trouble with SSS trigger that came with Stevens 200 action I bought on another forum about 6 months ago. I took it off/put on several times while inletting/bedding and looks either I lost a part, or something got damaged. The problem is that it either wont cock at all, or it will cock but wont fire, and the trigger itself is loose inside the housing, as if nothing is holding it there. The small spring that appears to be squashed fall out when i took the trigger off the action. Red arrow shows where is fall from. Also, the sear(?) (the silver part) feels tight. Should I lube the pivot it is sitting in? Thank you.

http://i54.tinypic.com/k3rqqq.jpg

Should be there some sort of pin or pivot here?

http://i55.tinypic.com/j7dd0m.jpg

[w123driver]

I already see from browsing the forum it is missing pivot. The question is what else it is missing and where I can procure these parts?

[Michadian]

W123 ,
I think that the safest thing to do is call SSS (and probably arrange to send it back there for repair/rebuild). I have quite a few such triggers and replace the factory (including accutrigger) with the SSS product every time. The phone number is on their ad here on the site.
Good luck and good shooting,
Dick

[pdog06]

W123 ,
I think that the safest thing to do is call SSS (and probably arrange to send it back there for repair/rebuild).

My thoughts exactly.