w123driver
02-07-2011, 08:29 PM
I posted this elsewhere, but looks I should have posted here. I am having trouble with SSS trigger that came with Stevens 200 action I bought on another forum about 6 months ago. I took it off/put on several times while inletting/bedding and looks either I lost a part, or something got damaged. The problem is that it either wont cock at all, or it will cock but wont fire, and the trigger itself is loose inside the housing, as if nothing is holding it there. The small spring that appears to be squashed fall out when i took the trigger off the action. Red arrow shows where is fall from. Also, the sear(?) (the silver part) feels tight. Should I lube the pivot it is sitting in? Thank you.
http://i54.tinypic.com/k3rqqq.jpg
Should be there some sort of pin or pivot here?
http://i55.tinypic.com/j7dd0m.jpg
http://i54.tinypic.com/k3rqqq.jpg
Should be there some sort of pin or pivot here?
http://i55.tinypic.com/j7dd0m.jpg