PDA

View Full Version : removing blind mag.



druid w/stick
01-31-2011, 02:23 PM
Need to remove magazine from action. Does it come up thru action or drop off bottom? Is one end better than other to pry? I've put some pressure to move tabs but pretty solid. Thanks!
Greg

tammons
01-31-2011, 02:52 PM
Assume you are talking stagger feed where the mag is attached to the action.

If so out the bottom.

I use a dull wood chisel. Has a beveled edge on one side and that helps pry it out.
Works better than a screwdriver.

Just a whack on the chisel pops it back in.

druid w/stick
01-31-2011, 05:00 PM
Thanks tammons.