Question about labeling/engraving aftermarket barrels

[mmhoium]

I want to label or engrave a couple Shilen SS barrels with caliber etc. I looked at engravographs and a couple Marking Methods Inc products but I just don't want to put $350+ into something to just write on a barrel. So, I'm looking for any suggestions I can get. All I can think of now is buying a label maker and printing out a sticky label. I'd rather have something that is a little more permanent though. Any ideas?

Thanks!

[geargrinder]

Sharpie?

Engraving-electro pencil?

[sha-ul]

Couple suggestions here,
1 find somebody nearby that has a laser engraver they could do a very nice etching job for ~$20 or so.
2 use a resist& acid etch it our self, or look into electrolytic etching.

[mmhoium]

Thanks for the tips! The acid etching looks like it might be the ticket! I really appreciate the help.

[dsculley]

Local gunsmith may have a set of stamps.

[Skunce]

I've been marking my barrels with one of these etching tools.

http://www.etch-o-matic.biz/

[cowboy924]

http://www.harborfreight.com/36-piece-1-4-quarter-inch-steel-letter-number-stamping-set-35121.html

Not as pretty as the laser engraving or etching, but it works.

[mudpig]

I've labeled a couple of barrels with the Harbor Freight stamps and they work good. Take your time on the lining up of the different stamps. I have been using a rocking motion with the stamp as I mildly tap the stamp. Try a piece of scrap until you get the hang of it. I think you can find these on sale for less than $10