View Full Version : Is the bolt/ parts frm a Tgt Action interchangable w/ a bolt frm a 10FP SA?
savageboy
10-12-2009, 11:03 PM
Of course the action will have to be re-head spaced- but is a .473 bolt face Target Action Bolt and / or Bolt parts interchangabable with a bolt from a 10FP Short action w. .473 bolt face or is it a totally different bolt?
82boy
10-12-2009, 11:03 PM
Yes, they are the same parts.
savageboy
10-12-2009, 11:04 PM
Thanks for the answer!
dcloco
10-13-2009, 01:00 AM
As long as the ejection of the case is on the same side of the action.
There are right bolt, left port.....and left bolt, right port actions out there.
I accidently installed a RB/LP bolthead on a 223...the cases were not coming out or coming out at the wrong angle. Good thing I was just checking the feed from the mag before I installed the barrel. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.