12 Benchrest base

[TBass]

I recently bought a new model 12 Benchrest in 6mmBR. I would like to know which one piece base people are using that has roughly 20 MOA built into the base.

[Tim300wsm]

i use a bench source 20moa on my my model 12

[Nor Cal Mikie]

+1 on the Bench Source. Comes in 0 amd 20.

[TBass]

Thanks for the advice. I am anxious to get the ole Schmidt & Bender on top & see if this thing is going to shoot ragged holes

[gt40]

EGW 20 MOA Picatinny is on mine.

http://egw-guns.com/store/index.php?main_page=product_info&cPath=39_128&products_id=179

http://forum.gon.com/showthread.php?t=564977&highlight=

gt40

[TBass]

Well my base arrived today... Has been installed along with my scope. Now I just have to wait until the weekend to launch some rounds

[Tim300wsm]

post some pics of your rig and that schmidt and bender

[TBass]

http://i520.photobucket.com/albums/w322/TBassBrann/Savage%206mm%20BR/SavageBR-2.jpg

A special thanks to 82Boy for taking the time to answer my PM's w/ in depth answers.... With a little luck I should have a range report ready by this time next week.

Here is what I can already tell you before even going to the range... this sucker is front heavy! That 29" barrel is a real monster.

[gt40]

http://i520.photobucket.com/albums/w322/TBassBrann/Savage%206mm%20BR/SavageBR-2.jpg


Here is what I can already tell you before even going to the range... this sucker is front heavy! That 29" barrel is a real monster.


That is why I had mine cut off at 26 inches. You only lose 14 fps per inch and the rifle will balance much better.

http://forum.gon.com/showthread.php?t=564977&highlight=

http://forum.gon.com/showthread.php?t=584687&highlight=

gt40

[TBass]

GT40 - I dig your rig!

Yes I am going to cut some of that barrel off... it is just to long & I could careless about the 15 to 20 fps that I lose. Additionally I am going to put a little weight in the back of the stock to further offset the long barrel feeling this rifle has.

With a little bit of luck I will be squeezing round off this Saturday

[Tim300wsm]

you both have sweet rigs im buying a target action in 3 months till then ive got a nice model 12 vlp im really envious of the scopes ive got a 6500 on mine
http://i1141.photobucket.com/albums/n587/Tim_Erdman/ImportedPhotos00003.jpg