glider77
04-25-2024, 02:29 PM
Many years ago, I shot competition benchrest in light varmint and hunter classes. I competed at local, state and regional levels in hunter class, but only locally in light varmint. I quit shooting for a number of years but am now picking it up again in retirement. Not planning to go benchrest again, just light recreational.
I purchase a Savage B22 FV-SR a while back. I found that I wanted a single shot tray instead of the rotary magazine. So I designed and 3D printed one. Seems to work ok, especially for a prototype. It works well enough that I don't plan to make any design changes.
I've posted the files on DropBox. They can be downloaded from https://www.dropbox.com/scl/fo/0lsagm7unspmn4uyffd2w/APIvAg_xLwoDr91MCJ2Im3s?rlkey=gzx45eq49e0xq8nnnf4g 7b7en&dl=0 NOTE: I make no claims of fitness for any particular use. It works fine in my rifle. That's my only claim.
Please read the "read_me_first.pdf"
I purchase a Savage B22 FV-SR a while back. I found that I wanted a single shot tray instead of the rotary magazine. So I designed and 3D printed one. Seems to work ok, especially for a prototype. It works well enough that I don't plan to make any design changes.
I've posted the files on DropBox. They can be downloaded from https://www.dropbox.com/scl/fo/0lsagm7unspmn4uyffd2w/APIvAg_xLwoDr91MCJ2Im3s?rlkey=gzx45eq49e0xq8nnnf4g 7b7en&dl=0 NOTE: I make no claims of fitness for any particular use. It works fine in my rifle. That's my only claim.
Please read the "read_me_first.pdf"