View Full Version : After Market Bolt Handles
centershot
12-28-2023, 12:21 PM
I looked at the FAQ section to see some of the bolt handles available. The one from SSS looks fine, but the last time I ordered from them there was no feed back in regards to shipping or order processing. I actually ordered two items and only received one.
So who, besides Savage, makes them? Northland has one but it is too short.
Dave Hoback
12-28-2023, 12:54 PM
There are many. A quick Google Image search gives about every one. Here are a few.
Glades Armory has Right/Left handed and even Round/Flat rear Receiver. (I prefer the flat regardless)
https://gladesarmory.com/product-category/savage-arms/savage-10-110-right-hand-savage-arms/savage-10-110-flat-receiver-bolt-handles/
Lumley makes a Titanium bolt handle. This is my favorite.
https://lumleyarms.us/savage-titanium-bolt-handle-right-hand
Anarchy
https://www.anarchyoutdoors.com/savage-10-110-threaded-bolt-handle-upgrade/
pdog06
12-28-2023, 01:58 PM
Stockade Gunstocks has a really nice one as well.
centershot
12-28-2023, 02:55 PM
Thanks for the suggestions.
Ramstud41
12-28-2023, 05:22 PM
If you are looking to just get a bigger knob, then MDT Tac makes some clamp on bolt knobs. I don’t have one yet but probably will try one
https://mdttac.com/mdt-bolt-knob/
Andrew863
12-28-2023, 08:54 PM
I have the glades armory bolt handle on my 338 and it has done very well. I liked the look better then the square version. I like the looks of the SSS handle but had heard of other shipping issues.
South Prairie jim
12-28-2023, 08:59 PM
The last one I bought was from iirc “extreme hardcore gear” it wasn’t a large oversized handle because I don’t believe they are necessary, rather a very nicely machined part that polished up quite well.
pdog06
12-28-2023, 10:54 PM
Thanks Dave.. I ordered a titanium handle from Lumleys today to try out for a target action build I’m getting ready to do.
Dave Hoback
12-29-2023, 12:12 AM
Awesome. You’ll like it. :thumb:
pdog06
01-02-2024, 05:27 PM
I Ordered the Lumley bolthandle from Lumley on the 28th and received it in the mail today! Not bad. 5 days with a holiday weekend mixed in.
Dave is right! These handles are very nice! And very lightweight compared to the factory and other aftermarket options.
Handi204
01-02-2024, 09:13 PM
I would avoid SSS at all took me four years to get a bolt handle and bolt head, the bolt handle finish is coming off, rattle can paint job lasts longer.
Robinhood
01-02-2024, 10:32 PM
I would avoid SSS at all took me four years to get a bolt handle and bolt head, the bolt handle finish is coming off, tattle can paint lasts longer.
that saddens me.
PhilC
01-03-2024, 09:47 AM
Kinney's sells SSS parts, you'd have to visit their site to see if in stock.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.