Model 99 fore stock bolt help

[wywindsor]

I'm looking for a 99 not sure what letter. The fore stock bolt was lost during a cleaning. It is the one with the sling hole. Any idea where I can find one. If not a picture with spec's so I can build one.


Thanks Ray

[Robinhood]

Go here for many model schematics
https://www.gunpartscorp.com/gun-manufacturer/savstevspgfld/rifles-sav/99-rifle-series

Where you will find pictures like this:
https://www.gunpartscorp.com/media/catalog/category/Savage_99C_schem.jpg

Where you will find pictures like this

https://www.gunpartscorp.com/media/catalog/product/1/4/145870.jpg?optimize=medium&fit=bounds&height=700&width=700
Or be able to purchase parts like this
https://www.gunpartscorp.com/gun-manufacturer/savstevspgfld/rifles-sav/99-rifle-series/99e.


This may not be what your after but it just took me a few seconds to look up model 99s.

[Model24]

I believe this is what you’re looking for. I’m afraid you’ll have to buy the full set.

https://grovtec.com/products/savage-99-gtsw32

[99lover]

Be very careful. There is confusion on the thread size of the barrel stud. I am trying to cure a damaged one on my rifle. Per my contact with Grovtec their forearm screw is 10-32. I have reason to believe the barrel stud is 8-40. screwing the wrong thread forearm screw will damage the threads in the barrel stud.