Removing my ejector?

[Andrew863]

On my 338 I would like to remove my Ejector since I only single feed on it and have no need to mag feed and couldn't if I wanted with my load. My question is, do I need to replace the ejector with a shorter one or make one that is flush with the bolt face or am I fine to just remove it? I figured I would ask before I just pull it out.

[Dave Hoback]

You can simply remove it & run it that way. Nothing needs to go in the empty hole, nor does the retaining pin need to reinstalled.

[Nor Cal Mikie]

What Dave said!! All of my Savage rigs are without the ejector and spring.
Did have a couple of custom bolt heads made for a 17 VHA by PT&G without the ejector rod hole.
Even shortened the spring on my XP 100 so the brass didn't eject so far. :cool:

[PhilC]

Have 2 I run sans ejector, simply removed them and works great.

[Andrew863]

Thanks for the replies.