Is this the place for Savage Striiker Questions?

[.375H&H]

None of the forum topics seem to fit Savage Striker pistols. Is this the place for them because they are sort of a 110 action? The other pistol forum topics don't seem to be right either.

Sorry to sound so dumb.

[PhilC]

Try the Bolt Action, Falling Block & Rotary Breech Pistols (http://www.savageshooters.com/forumdisplay.php?240-Bolt-Action-Falling-Block-amp-Rotary-Breech-Pistols) in the Specialty Pistols Area. ;)

[Blue Avenger]

what are you wondering about strikers?

[.375H&H]

I have what I believe is a 510F, since it is blued, and I think that only the F model came blued.
First I would like to confirm that.

Interesting to me, the frame does not say Savage or show a Model number on it. The barrel that came on it, the .308 14", has the name Savage and a model designation, and the bolt has the Savage name, but nothing on the frame. Seems odd?

Last question, it has a two round mag, but the rounds sit low in the mag, if I press them both in, then the bolt doesn't strip a round free to load to the chamber. Does it need to start with a loose round floating on top of the follower?

[Blue Avenger]

F would be a date code.
510 was blue and 511 was SS
serial number is on frame.
No it should be 3 rounds, one in the chamber and 2 in the mag.

[.375H&H]

Thanks for that.

The serial number does start with F, but this page of the Stoeger Industries catalogue does call the Model 510F.

I have found a few pages, from 1999 to 2002 that show an F in blued steel.

https://www.ebay.com/itm/402098706052?_trkparms=amclksrc%3DITM%26aid%3D1110 006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201 210111314%26meid%3Da2bc8dc9703b46e186ef87bfb43c1ca 6%26pid%3D101195%26rk%3D2%26rkt%3D12%26sd%3D363556 365679%26itm%3D402098706052%26pmt%3D1%26noa%3D0%26 pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuW ithLambda85KnnRecallV1V2V4ItemNrtInQueryAndCassini VisualRankerAndBertRecallWithVMEV3&_trksid=p2047675.c101195.m1851&amdata=cksum%3A402098706052a2bc8dc9703b46e186ef87b fb43c1ca6%7Cenc%3AAQAIAAABUPqB0EgCndAssfMWNy0AT0Gy tGzF9%252By0G%252BlcW69DgBK3Qlz4BjwJQqPkN4K8I7qz9G oVciN1QNWqyS8EeqYS8rZRsDvyvw34m3N%252FyJKokwCTIIc3 RNym2SNW8ARudP72DyiwgIY0dfUnIr5%252BMZDTaouYZ2Gqtm 4Fd8M761bDh3zdPER9Y6k7arGLFuMYNkmyKVumaLgzE01s0xNc eK8%252Bipricx%252B9IKAT4ItOkDDylguAJo5ZjrJ0W32SRy O9VKm6cVLPeX%252B3V4rs07aYs%252FN%252BrHrcSsSn3Hne LfFW8wskKxLzwdM16GznMwZB9F0L1w%252FVhg8xVr5mQzBdTA VBuZke4Gi6VjXEP5mK4GDuYvkM0%252B9XKqDbfb%252FgEowJ xge8zrOLA0Fl6bt4T8RyS05cnrdr8Pel4FBiT76clTx4zGo0XJ SQpQ5s7mDq8HJtRCd7KCvlgg%253D%253D%7Campid%3APL_CL K%7Cclp%3A2047675

[Blue Avenger]

have you had it out of the stock? trigger assembly have a bar that trips the front of the trigger or a roller that trips the back?

[.375H&H]

Not exactly sure what you mean. Here's a picture of the trigger.

https://imgur.com/a/pGQ9Mv8

Thank you!

[Blue Avenger]

You have the second generation trigger (version). There were three. Third and least common the pivot on the mag box was sandwiched between two metal tabs instead of the one in an attempt to stiffen flex points.

[.375H&H]

Thanks for that info.