View Full Version : grip cap removal
yellowhammer1
12-09-2010, 12:37 PM
how do you remove the grip cap off of a factory wooden or plastic stock? you know, the black plastic cap with the indian head on it...
If I remember correctly you need to carefully pry off the silver indian head thing with a small screw driver or blade or something like that. Then under it you will find a screw attaching the plastic cap itself to the stock.
yellowhammer1
12-10-2010, 02:38 PM
oh.. you have to tear it up to get it off? bummer...
Not necessarily. You might be able to remove the indian head emblem in one piece if you're careful. It's glued to the plastic cap.
geargrinder
12-11-2010, 11:24 AM
That's correct, under the Indian head. It's thicker than a normal sticker so you should be able to get it off unharmed.
yellowhammer1
12-17-2010, 12:12 PM
thanks, ya'll - will give it a try... :P
jonbearman
12-17-2010, 02:07 PM
I would just purchase a new one .I will bet they are not over 10.00. Try gunparts corp.They are in west hurley new york.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.