Used Savage Model 12 F/TR

[vince_ross]

So, I recently found a used Model 12 F/TR (308) and have been thinking of buying it. I just am not that familiar with Model 12's. It looks to be in really good condition though, and I have bought used Savage rifles before with great success.
Is anyone here familiar with this model, that would be willing to share some information? Just anything to look for, or that may be different from other models. I did notice that this barrel has a threaded brake on it, and I didn't think these had a brake since it was basically a factoryF-class gun. Maybe early models were made with a brake??? Like I said, I'm not familiar with this model at all. As far as I know it is the factory barrel...maybe the owner just had it threaded and a brake made for it?

I spoke with a few guys at the shop, and none of the ones I spoke with took it in used, and didn't know anything other than they've had it a very short time.

Thanks in advance fellas!

https://ohiovalleyphotography.zenfolio.com/img/s/v-10/p1527369236-3.jpg

https://ohiovalleyphotography.zenfolio.com/img/s/v-10/p1527369172-3.jpg

https://ohiovalleyphotography.zenfolio.com/img/s/v-10/p1527369198-3.jpg

https://ohiovalleyphotography.zenfolio.com/img/s/v-10/p1527369184-3.jpg

https://ohiovalleyphotography.zenfolio.com/img/s/v-10/p1527369161-3.jpg

[Alguapo]

I shoot a Mod. 12 LRPV in .204 and 2 Mod 12 FV's that have had a lot of stuff done to them in 20 Practical. Depending on Price it could be a real deal for you. My 12's have been incredible shooters. If the barrel has been shot out it's a easy fix with a precut barrel from Shilen or any barrel maker of your preference or even change the caliber that takes the same bolt face of the .308. I see from the pictures it's got the red target trigger that is easy to set to the pull you like. Just depends I guess on what your willing to spend. Good luck.

[Dave Hoback]

That is a fantastic Savage. That Savage Action, being the port style, single shot, is favored as the most accurate of Savage Actions. It’s a Large Shank & already comes with some goodies.. the Target trigger, oversized bolt handle, upgraded Laminate target stock. Good find. Go ahead & snatch that up if the price is right.

[jpx2rk]

Previous owner may have had the barrel threaded for a brake, a common practice.

[vince_ross]

That is a fantastic Savage. That Savage Action, being the port style, single shot, is favored as the most accurate of Savage Actions. It’s a Large Shank & already comes with some goodies.. the Target trigger, oversized bolt handle, upgraded Laminate target stock. Good find. Go ahead & snatch that up if the price is right.

They want $800 for it. The lowest price I've seen new has been about $1500-ish, used about $1000-$1100.

[wbm]

That is a fantastic Savage. That Savage Action, being the port style, single shot, is favored as the most accurate of Savage Actions. It’s a Large Shank & already comes with some goodies.. the Target trigger, oversized bolt handle, upgraded Laminate target stock. Good find. Go ahead & snatch that up if the price is right.

+1

[charlie b]

If I had been a little smarter when I was shopping I would have an F-TR or F-class instead of the 12BVSS. I'd love to have the heavier target action instead of the varmint one. I do believe the owner had the barrel threaded and compensator added. If it is a good one it will reduce recoil just a bit more, which would be a positive thing. The 1-12 twist and long barrel means it can push 155gn bullets, like the Bergers or Lapuas, out to 1000yd easily, as well as still being able to handle the 175's.

FWIW, it would also make a really nice cast bullet rifle for 600yd targets. :)

[Dave Hoback]

They want $800 for it. The lowest price I've seen new has been about $1500-ish, used about $1000-$1100.


Great deal! Grab it.

[PhilC]

The action alone would sell quickly for $500, better buy it while you can!

[Slowpoke Slim]

If that's the model and the features you're wanting, I would say go for it. Worst case scenario, you can swap the barrel for a new one. They're really easy to change barrels on. I just did one yesterday in under an hour, and the only reason it took that long is that it's been over 10 years since I did one, and I had to round up all the tools from wherever I had stored them.

[vince_ross]

If I had been a little smarter when I was shopping I would have an F-TR or F-class instead of the 12BVSS. I'd love to have the heavier target action instead of the varmint one. I do believe the owner had the barrel threaded and compensator added. If it is a good one it will reduce recoil just a bit more, which would be a positive thing. The 1-12 twist and long barrel means it can push 155gn bullets, like the Bergers or Lapuas, out to 1000yd easily, as well as still being able to handle the 175's.

FWIW, it would also make a really nice cast bullet rifle for 600yd targets. :)

I actually missed out on a 12BVSS a little over a year ago...I saw one in 22-250 at a small gun shop and they wanted something like $750. I ended up not buying it for some stupid reason....my wife even said "you aren't buying it? Why not?" Ever since then, I've been on a mission to find something like this.

Yeah, the threaded compensator will be a good thing (I also run most rifles suppressed anyway). This will be a good option.



Great deal! Grab it.

I actually just did! It should be at my local shop by the end of the week.

[vince_ross]

If that's the model and the features you're wanting, I would say go for it. Worst case scenario, you can swap the barrel for a new one. They're really easy to change barrels on. I just did one yesterday in under an hour, and the only reason it took that long is that it's been over 10 years since I did one, and I had to round up all the tools from wherever I had stored them.

That's exactly what I was thinking....I do have a Savage barrel nut wrench on order and will pick up a good barrel vise also. That's another reason I've come to really like the Savage action.

[Slowpoke Slim]

My own 2 cents (worth every penny) would be to skip the barrel vice and go with an action wrench. Wrap the front of the action (just the portion that the action wrench will fit on) with scotch tape to prevent the action wrench from marring the finish on the front of the action. There's really no better way (in my opinion). Problem with a barrel vice is, unless the vice inserts fit your barrel you're trying to take out *exactly right*, there's a pretty good chance you'll mar the barrel finish. Or worse, that the barrel will just slip in the vice entirely, and you can't get enough grip to get the barrel loose.

I've never NOT been able to get a barrel off (or on, but that's easy) with an action wrench to hold the receiver, and a nut wrench and dead blow hammer to loosen the nut. I "hold" my action wrench in my shop bench vice to keep it stable and stationary. I think 3 smacks with the dead blow hammer on the action wrench is the most I've ever needed to get one loose. And that was on my buddy's blued finish 204 Ruger chambered Savage. Most have been 1 mild smack only.

[vince_ross]

My own 2 cents (worth every penny) would be to skip the barrel vice and go with an action wrench. Wrap the front of the action (just the portion that the action wrench will fit on) with scotch tape to prevent the action wrench from marring the finish on the front of the action. There's really no better way (in my opinion). Problem with a barrel vice is, unless the vice inserts fit your barrel you're trying to take out *exactly right*, there's a pretty good chance you'll mar the barrel finish. Or worse, that the barrel will just slip in the vice entirely, and you can't get enough grip to get the barrel loose.

I've never NOT been able to get a barrel off (or on, but that's easy) with an action wrench to hold the receiver, and a nut wrench and dead blow hammer to loosen the nut. I "hold" my action wrench in my shop bench vice to keep it stable and stationary. I think 3 smacks with the dead blow hammer on the action wrench is the most I've ever needed to get one loose. And that was on my buddy's blued finish 204 Ruger chambered Savage. Most have been 1 mild smack only.

Awesome! Thank you for the information....I will look at those. Are most 2 lug action wrenches the same? I mean, will I need to order one specifically for a model 12, or will one for "savage action" fit all?

Such as this: https://patriotvalleyarms.com/bighorn-remington-savage-action-wrench/

[Dave Hoback]

Yes, that will work on all Savage 10/110, including your Model 12, & Axis Actions. There are maybe a half dozen of this type that will work with Savage. However, the Patriot Valley is the most affordable.

[Robinhood]

It looks like it has the short screw spacing. That would diminish the resale price slightly.

[charlie b]

For barrel stuff I just went to Northland Shooter Supply. They are great folks and will make sure you have what you need.

I got my action vise from NSS (and nut wrench, a new nut and go/no-go gages). I also bought my Shilen barrel from them.

[vince_ross]

It looks like it has the short screw spacing. That would diminish the resale price slightly.

It has the 3 bolt action, not sure what the spacing is yet.

[Dave Hoback]

Just measure between the centers. Don’t know off the top of my head, but it does look like one of the Actions with 3.440” screw spacing. And someone just had a brake installed. But the shorter screw spacing only matters for locating a new stock; which is moot being it already has a very good option.

[Slowpoke Slim]

I would not worry about screw spacing at all. The only thing that affects is IF you're out shopping for an aftermarket stock.

I agree with the testament about NSS. Northland is what got me set up in the first place. Outstanding service. He even stood by on the phone while I did my very first barrel swap (which went perfectly).