View Full Version : I can't use my newer Savage 243 to hunt,it wont extract the cases?????
willyp
12-04-2010, 05:52 AM
I bought it 2 years back, and it set in my gun cabinet,[never loaded]for my granson to use.
It will extract 1 or 2 and the next ones drop off half ways out and you must tip the rifle up,so they drop out!
Any ideas,what is wrong??????
keeki
12-04-2010, 07:23 AM
check the little ejector pawl in the end of the bolt, it sits on top of a spring and steelie ball and gets stuck sometimes
Joe O
12-04-2010, 07:45 AM
Seems half the savage bolt guns with that type extractor have had the same problem.I went through three extractors,before one worked.Call customer service and ask for a couple new extractors.Search this fourm for replacement procedure.A larger detent ball will ensure consistancy,but Savage doesn't have them SSS has them,or you might get lucky at a hardware store.
willyp
12-05-2010, 09:12 AM
Thanks guys. I sort of figured that was the problem!
How do i contact Savage Arms?
pdog06
12-05-2010, 09:36 AM
How do i contact Savage Arms?
http://www.savagearms.com/customerservice/contact/
You can also get new extractors from Numrich Gun Parts(they ship quick also!!!)
Item #'s 15,16,17
http://www.gunpartscorp.com/catalog/Products.aspx?catid=484
keeki
12-06-2010, 06:28 AM
prolly just has a burr or since its been sitting maybe a little rust, id just clean up and shoot it.
Dennis
12-06-2010, 08:40 PM
My 22-250 did the same thing!
Just get SSS to send you a complete new bolt assembly and you won't have any more troubles! That's what I did and the cost was minimal!
The extractor pin is to short, you can file it so it will stick out a few thousandths further, but that's your decesion.
There are many threads on this subject in the last two years on SS!
Smokey262
12-06-2010, 11:07 PM
The extractor pin is to short, you can file it so it will stick out a few thousandths further
Please explain this to us
Dennis
12-07-2010, 09:35 PM
I might need some help here, at work, but there are several threads on this subject with pictures. Try to do a search, use 22-250 won't extract empty's or something like it. I will see if something is in my history!
Dennis
12-07-2010, 09:40 PM
http://www.savageshooters.com/SavageForum/index.php?topic=15070.02
Start here, keep doing searches
sha-ul
12-08-2010, 09:04 PM
http://www.savageshooters.com/SavageForum/index.php?topic=15070.02
Start here, keep doing searches
try this link
http://savageshooters.com/SavageForum/index.php/topic,15070.02
wever
12-08-2010, 10:05 PM
Wow, based on how many hits on this sight alone it appears that I'm far from alone with stuck ejector pins. Model 111, 7mm Rem mag. I disassembled the bolt to the head, had a difficult time removing the ejector retaining pin, (ruined it), removed the ejector and will "dig" out the spring later. Will call SSS and/or Numrich for replacement parts tomorrow. My questions are; first, is there "better" replacement parts out there than o.e.m? and second, can I trust this rifle on a remote hunt?
Dennis
12-09-2010, 09:13 PM
Get a complete new bolt assembly from SSS, that's what I did after explaining why I wanted one! I have had no problems with his bolt, all spent cases eject perfectly!
I had so many post on my 22-250 not ejecting cases, somebody from Savage actually called me!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.