Need to adjust my trigger on my model 110 for a lighter trigger pull weight

[Dave Hoback]

Mr. David,

Do you happen to know if there is ma certain name or Model for the specific trigger assembly that I sent you from my gun?

I’m not quite sure what you mean Bud? You didn’t send me anything. Do you mean the pictures you posted of your trigger? If so, I know every part has a specific part #, but I wouldn’t know those. As far as the trigger assembly, no. Nothing specific to it other than being a 3-screw trigger. These were the best triggers Savage made.

[Budman6]

Hey Mr. David,

I’m sorry I was more specific in my last post. I was referring to the pictures I sent. I didn’t know if the trigger assembly as a whole had a name for it like they do now. For example, a Timney, rifle basix, ruger, etc.

[Dave Hoback]

Just Savage 110 3-screw.

[DesertDug]

I did the wire change out and was very please with new trigger pull. Terry smooth.
Then I went to hobby lobby and got .039 music wire and replaced the triger spring. I works great. I do not have a pull scale, but it is noticeably lighter. Gonna cancel the ordered timney. $99 price difference. Wire was $1.07 and have enough for 20 or so triggers..

Here is a side. Y side of the spring wire:

this is from my build thread.
https://www.savageshooters.com/showthread.php?61854-110e-270-build-help/page4
https://s8.postimg.cc/mwdiqdd1d/IMG_1722.jpg (https://postimg.cc/image/mwdiqdd1d/)

[Dave Hoback]

I keep some made up on hand, incase someone wants one

https://i.ibb.co/89tNyND/1-D9-F27-FE-596-F-4581-A01-A-068853-D47-C8-D.jpg (https://ibb.co/RcdYXYp)

[Budman6]

Mr. David,

How much do you charge for the springs you build? How much would it cost me if I ordered one from you?

[Dave Hoback]

Mr. David,

How much do you charge for the springs you build? How much would it cost me if I ordered one from you?


LOL! I don’t charge… I do full trigger jobs for free, for other members, or just send you a spring in the mail. Just what I do. :thumb:

[Robinhood]

Great job on this post Dave. I was thinking that you had the new and old 3 screw reversed. Heck I don't even remember anymore. When are you going to start doing bolt lift jobs? LOL I think that is as much an art as triggers.

[Dave Hoback]

Ya know, I may very well have the two backwards:p But the 3-screw with the included part for spring hold down, I just believe is a nicer trigger. They really come out nice & crisp when worked.

I’ve spoken to a couple people about massaging bolts as well & doing the Lift kits for them, like those several I made some time back & gave away to members as gifts. And if a member was interested I’d certainly take care of that as I was able to. However, they are more time consuming and I’d have to be careful as I run out of steam quickly. Even just sitting down at my work bench, LOL! Not to mention, I’m obviously not in a position to supply many, many people with doing Lift Kits. The ones I’ve done & given away as gifts here(and will do again at some point), is how I want that to be. Making them non stop isn’t realistic as I’m not physically or monetarily able to. And even if I was able to physically, making parts to sell, & charging for the small parts services I perform, is not something I’m interested in. I enjoy doing what I’m able to, as long as The Lord allows me to & as gifts to or just helping out fellow members.