View Full Version : Question about 110 - 111 sears
oldwrench
11-29-2022, 03:36 PM
I am hoping someone can tell me what the difference is between the sears of the 110 series, the 111 series pre & post accutrigger?
Thank you - oldwrench
Dave Hoback
11-29-2022, 08:21 PM
The Sears? None really. Same basic sear used. Doubles as the bolt release & made of stamped steel.
bootsmcguire
11-29-2022, 11:23 PM
+1 with Dave. Pre and post Accu-trigger I am unaware of any difference. I have swapped 3-screw and Accu-triggers on actions designed for either with no change to sear needed. Trigger brackets on the other hand are different, but that's another topic
J.Baker
11-30-2022, 02:42 PM
Only notable difference I'm aware of would be for the bottom bolt release sears as they won't have the top bolt release "flag".
big honkin jeep
12-01-2022, 10:38 AM
To add I think some of the older ones were manufactured as 2 pieces that were pressed together with a pin. I only mention this because I had two of those particular ones that broke and I wound up clamping them back in place spot welding them at the pin then filing down the spot and rebluing them. Differences in the model numbers is none.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.