Accufit bedding

[woodsrunner]

I'm wondering if anyone has bedded the accufit stock on their 110 ultra lite rifle ?
Thank you.

[MS50]

I don't own an accufit stock, but I do have an Mod12 with accustock, and a Mod10 in a Hogue with internal chassis. I debated the bedding issue for both. I torque tuned both receivers, using established handloads. Group sizes were reduced significantly in both rifles. There is no need to bed my rifles. If you're not familiar with torque tuning, search this site for detailed instructions. Both of mine are 55 in/lbs front and 50 in/lbs rear. Worked for me.

[Robinhood]

I pillared and bedded a Stevens 200 stock with excellent results.

[GrenGuy]

Robin, didn’t Your Stevens 200 stock already have pillars ?

[Robinhood]

Mine were plastic. I installed brass threaded lamp rod. It was my first bed job and I needed practice. Cheap practice. I used JB weld. Not the perfect hardness but that turned out to be one accurate hunting rifle in 7mm08. I recently passed that on to a great friend I met on here. He built his son a rifle and I sure hope he gets some good use out of it.