Looking for a source for a 69RXL-series E extractor

[electricblue]

I’m a newbie , hoping to pick up some great Savage info!
At the moment I’m rebuilding a friends 69Rxl -e , though it’s
missing the extractor. Anyone have one or could point me to a gunsmith who may have worked on this law enforcement and military shotgun ?

[Big Al1]

Savage model 69 is the same as the model 30. Stevens Model 77 Shotgun Series - Internet Movie Firearms Database - Guns in Movies, TV and Video Games (imfdb.org) (http://www.imfdb.org/wiki/Stevens_Model_77_Shotgun_Series)

Numrich has your extrector. Savage/Springfield/Stevens 30 Series A Parts | Gun Parts Corp. (https://www.gunpartscorp.com/gun-manufacturer/savstevspgfld/shotguns-sav/30-shotgun-series/30-series-a)

Apparently that's a common problem, there's several complete bolt assemblies for sale on Ebay, with broken extractors!!

[electricblue]

Thanks Big Al 1, found it, though it’s out of stock. At least I know what it looks like now.
best regards,

[Big Al1]

Look again, they are in stock at Numrich.

[electricblue]

Look again, they are in stock at Numrich.
Maybe I’m calling it an extractor and it isn’t. It’s not a part of the bolt assembly, not a firing pin extractor. I saw those.
This part is about 2” long an sits in a groove on the left inner wall of the chamber area, on the left side and held in place by a screw. Maybe an ejector plunger ? The numrich # is 142960c .
many advice welcomed! Thanks .

[Big Al1]

Ahhh. Proper nomenclature helps!! Sounds like you need the ejector assembly and ejector screw. Part #6A and B and part 17. The screw has two different thread sizes, so make sure you get one that match's. I'd call to make sure they get it right!! Good luck!
Savage/Springfield/Stevens 30 Series A Parts | Gun Parts Corp. (https://www.gunpartscorp.com/gun-manufacturer/savstevspgfld/shotguns-sav/30-shotgun-series/30-series-a)

[electricblue]

Thanks for sticking with me and getting me on the right part. Awesome help ! I’ve ordered it , along with both screws just to make sure I can finish the repair. I hope to be reporting back soon to say that the shotgun is back in service.

[Big Al1]

:congratulatory: