Anyone make a bolt handle that has more down bend?

[qtropwr]

On my just picked up 111 300Rum, the bolt handle comes within a half inch of the scope. I have to palm the bottom of the bolt to cycle it.

[Dave Hoback]

The newer Glades Armory handles have a bit more angle to them, than the one I purchased years ago, which is straight.

https://gladesarmory.com/product/savage-110-round-back-profile-rh-black-oversized/

[qtropwr]

Interesting ,I like it, except for the giant knob. Looks like it might be replaceable.

[Dave Hoback]

Yes, the Glades handles are threaded 5/16-24 as most are. There are many different bolt knobs available.

[Robinhood]

Yes, the Glades handles are threaded 5/8-24, as most are. There are many different bolt knobs available.

5/8"-24 ? wow thats a big Bolt knob.

5/16"-24 is what I use unless I make the bolt handle.:cool:

[Dave Hoback]

Lol! Yes, finger slip on the numbers. Editing for good measure. Thank you Robin

[mnbogboy2]

I agree with robinhood. I just made one and threaded it 5/16-18, on both parts, the handle andthe knob.5/16-24 may have been easoer. I thread on a 5/16-18 coupling nut each of the two pieces and can extendthelengthwith a piece of threaded rod..

[South Prairie jim]

I use one of these in a smooth polished model
https://www.opticsplanet.com/xtreme-hardcore-gear-savage-bolt-handle.html

[HammerDown]

I like that Precision Hardcore bolt handle. Unfortunately its out of stock :black_eyed: