milcollector
02-06-2022, 06:14 PM
Hi, I'm a new member on the forum and I'm hoping someone can help me with some information. I recently acquired a Savage Sporter in .22 cal. It's not marked model 23 or 23AA, etc., just Savage Sporter. SN is 85,xxx. It does have the schnable stock. Because of it's age, I figured I would pull it out of the stock and clean it up. It was pretty straight forward but when I put it back together the front magazine retainer has play in it and I don't understand why as it didn't before. It seems like there is only one way to assemble it with the front screw going through the hole in the magazine retainer. However the hole in it is slightly larger than the screw which is then allowing the play. I'm obviously doing something wrong but have no idea what that might be as it seems simple enough. Any thoughts? If anyone had a assembly diagram that might help. Also, with an 85,xxx serial range, any idea when it might have been made? I like these old Savages and am looking forward to shooting it. Thanks for your help.