replacement trigger

[macon]

whats a good replacement trigger for the accutrigger

[drybean]

sss comp trigger

[bobcat30]

SSS comp ++++++1

[pdog06]

whats a good replacement trigger for the accutrigger


ANYTHING !(SSS, Timney, Rifle Basix SAV1 and SAV2).. You will have great improvement with any of them.

[macon]

where can i buy a sss trigger

[1Shot]

...unless it's a serious paper puncher I'ld keep the accu-trigger..Use the extra $100. bucks on the scope...I have several hole punchers that still have the accu-trigger on them..

[dcloco]

Jard....hands down. They just started making them this year and did their homework.

[macon]

i hate that accutrigger and its sub moa right now m- 12bgtvss 204

[82boy]

Please do a search, this topic has been covered a few hundred million times.

[macon]

well im sorry for bothering you sir.....

[macon]

i wasnt trying to a wise guy jus asking questions ill do a search for now on

[Senderofan]

whats a good replacement trigger for the accutrigger


You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne

[macon]

its on a model 12 bgtvss

[geargrinder]

You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne


It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.

[Senderofan]

whats a good replacement trigger for the accutrigger


You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne




It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.



Should have said I replaced with a SAV-2...using the heavier spring....Red I think. Anyway, it's a much better trigger than the "Standard" accutrigger, IMHO.

Wayne

[Agueybana]

I try them all Timney, Sharpshooter, Riflebasix and Riflebasix 2. My favorite one is Riflebasix 2. Is a true drop in part. Also it can go down to 4 onz if you need it. Real easy to adjust, but it cost a little more.