View Full Version : replacement trigger
macon
11-26-2010, 06:06 PM
whats a good replacement trigger for the accutrigger
drybean
11-26-2010, 06:28 PM
sss comp trigger
bobcat30
11-26-2010, 07:35 PM
SSS comp ++++++1
pdog06
11-26-2010, 08:54 PM
whats a good replacement trigger for the accutrigger
ANYTHING !(SSS, Timney, Rifle Basix SAV1 and SAV2).. You will have great improvement with any of them.
macon
11-26-2010, 09:01 PM
where can i buy a sss trigger
1Shot
11-26-2010, 09:29 PM
...unless it's a serious paper puncher I'ld keep the accu-trigger..Use the extra $100. bucks on the scope...I have several hole punchers that still have the accu-trigger on them..
dcloco
11-26-2010, 09:43 PM
Jard....hands down. They just started making them this year and did their homework.
macon
11-26-2010, 09:45 PM
i hate that accutrigger and its sub moa right now m- 12bgtvss 204
82boy
11-27-2010, 12:47 AM
Please do a search, this topic has been covered a few hundred million times.
macon
11-27-2010, 01:09 PM
well im sorry for bothering you sir.....
macon
11-27-2010, 02:16 PM
i wasnt trying to a wise guy jus asking questions ill do a search for now on
Senderofan
11-27-2010, 07:21 PM
whats a good replacement trigger for the accutrigger
You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.
So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!
Wayne
macon
11-27-2010, 07:41 PM
its on a model 12 bgtvss
geargrinder
11-27-2010, 07:44 PM
You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.
So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!
Wayne
It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.
Senderofan
11-27-2010, 09:01 PM
whats a good replacement trigger for the accutrigger
You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.
So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!
Wayne
It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.
Should have said I replaced with a SAV-2...using the heavier spring....Red I think. Anyway, it's a much better trigger than the "Standard" accutrigger, IMHO.
Wayne
Agueybana
12-01-2010, 07:12 AM
I try them all Timney, Sharpshooter, Riflebasix and Riflebasix 2. My favorite one is Riflebasix 2. Is a true drop in part. Also it can go down to 4 onz if you need it. Real easy to adjust, but it cost a little more.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.