110 acufit stock help

[Ejorso]

I just got a Savage 110 ultralight 308. I took the stock off and adjusted my trigger. I then proceeded to knock the trigger guard and magazine holder into the floor. Two spacers and a small washer flew out. I cannot for the life of me figure out where they go. They are not on the diagram and savage won't send me an image of how they go. Not too happy with my first savages customer service Can anyone help me? I would love to shoot my new gun but can't now.

[CRJR]

Ok , I have a Accustock in the closet so I looked . The little washer goes under the screw that is in front of the magazine release . The spacer I'm not sure about , but I didn't take the trigger guard off mine . Could it go under the bolt release ?

[Dave Hoback]

What shape is the spacer? Can you post a pic?

[Ejorso]

Here are the two spacers. Thank you for the location of the washer. I am pretty sure the smaller spacer goes on the screw in front of the mag release, same as the washer just the top side of the mag well.

Now the other spacer...I am clueless and I have tried many locations. https://uploads.tapatalk-cdn.com/20220113/c1ad8b61043e59b7bc1cf72d542ddfef.jpghttps://uploads.tapatalk-cdn.com/20220113/4cad21f41fc035b452d6f21b9f473908.jpg

Sent from my BE2026 using Tapatalk

[Dave Hoback]

Does it by chance go between the trigger guard & stock...like a locating dowel in the screw hole? It definitely looks like the screws go through them.

[Ejorso]

I have tried there but it does not fit. Savage finally said it goes between the mag well and trigger guard. I have put it both ways and it still jams up. I got something wrong. Man this is frustrating. 30 years of hunting never had such an issue with a weapon.

Sent from my BE2026 using Tapatalk

[Dave Hoback]

I’m sorry. That is what I meant. Between the bottom metal and stock....on the Action screw. It certainly looks like a screw goes through it.

[CRJR]

Ok , I took mine apart , here's what I have , but it looks different than yours . Mine is a 7mm rem mag , so its a long action .https://i.ibb.co/7b6XHN2/IMG-1473.jpg (https://ibb.co/1bwL3J8)

[CRJR]

The spacer goes in the stock , then the mag , then the trigger guard .

[Ejorso]

Thank you so much!

Sent from my BE2026 using Tapatalk

[Dave Hoback]

Isn’t that what I had said, LOL! J/K.. glad you got it figured out.

[CRJR]

Isn’t that what I had said, LOL! J/K.. glad you got it figured out.

Well , I said it better , LOL !

[CRJR]

Thank you so much!

Sent from my BE2026 using Tapatalk
Hope you got it back together , I hate it when that stuff happens , and it happens to me a bunch , LOL

[Dave Hoback]

Well , I said it better , LOL !

Indeed! “I gots problems with dem words sometimes!”

[Ejorso]

Yes I got it all back together. Thanks to everyone.

Sent from my BE2026 using Tapatalk

[CRJR]

Yes I got it all back together. Thanks to everyone.

Sent from my BE2026 using Tapatalk
Awesome , have fun with it !

[CRJR]

Indeed! “I gots problems with dem words sometimes!”
Yeah , but you know stuff !

[Ejorso]

Ready to go!https://uploads.tapatalk-cdn.com/20220114/ac584a4b0518745cb721033c6f5c61e2.jpg

Sent from my BE2026 using Tapatalk

[J.Baker]

Those "spacers" are something fairly new (last 2 years or so). I went through this same "where's this go?" game when I got my first review rifle in with one. Didn't seem like it fit right anywhere no matter where I tried it as it would leave the bottom metal standing proud of the stock.

[CRJR]

Ready to go!https://uploads.tapatalk-cdn.com/20220114/ac584a4b0518745cb721033c6f5c61e2.jpg

Sent from my BE2026 using Tapatalk

Nice ! Have fun .