PDA

View Full Version : Loading for the 350 Legend


CJP1
08-07-2021, 10:18 PM
I have a 22" barreled bolt action rifle. I found some 150gr Makers Rex bullets that I want to load. I have H110 and Lil-Gun powders. Any help would be greatly appreciated.
GaCop
08-08-2021, 07:04 AM
Those powders should work well with the bullet you have. The 150 should put your velocities in the 2100 fps range. Sight in about 2" high at 100 yards and your bullet drop at 200 should only be around 4.5".
Harry Pope
08-08-2021, 12:49 PM
The OP’s bullet can exceed 2100 fps by a lot. Here is Hodgdon data for a similar bullet. Start low and work up.


https://i.postimg.cc/SsXfF5XP/C769393-F-5-CE4-4809-BD34-97517-BC84-D4-B.jpg
GaCop
08-12-2021, 07:23 AM
The OP’s bullet can exceed 2100 fps by a lot. Here is Hodgdon data for a similar bullet. Start low and work up.


https://i.postimg.cc/SsXfF5XP/C769393-F-5-CE4-4809-BD34-97517-BC84-D4-B.jpg That's even better!:thumb::thumb: