110 Vortex Hunter XP scope ring torque specs...

[Papa_D]

Getting ready to clean the scope mounting bolts/screws on my new .308 110. I've read through the Vortex booklets that came in the packaging. No info given, that i saw. Does anyone happen to know the torque specs for the rings?

Sent from my SM-A205U using Tapatalk

[SageRat Shooter]

This should help.... If they're the correct rings.

https://vortexoptics.com/vortex-hunter-1-inch-rings.html

[Papa_D]

This should help.... If they're the correct rings.

https://vortexoptics.com/vortex-hunter-1-inch-rings.htmlHuge help. Thanks!

Sent from my SM-A205U using Tapatalk

[Texas10]

I remember reading somewhere that Vortex issued a warning about over torquing ring screws. As I recall, 17 in lbs was the max otherwise the erectors will lock up inside the scope. Having personally experienced this, I can attest to the warning. Also try to not have the turret close to the rings.

[Papa_D]

I remember reading somewhere that Vortex issued a warning about over torquing ring screws. As I recall, 17 in lbs was the max otherwise the erectors will lock up inside the scope. Having personally experienced this, I can attest to the warning. Also try to not have the turret close to the rings.I left the scope in the factory position, since it is dead on perfect for me. I removed, cleaned and blue loc-tited each bolt, one at a time. I also popped the action out and the trigger at it's lowest weight. Hoping to test it later this week.

Sent from my SM-A205U using Tapatalk

[abq87120]

My Vortex rings have the torque listed on them.