View Full Version : Blind Magazines 110 LA part number
culpeper
01-30-2021, 04:09 PM
Man, I'm having a hard time finding a 110 LA blind magizine. I just need one for the B&C stock. I won't be using it other than to hold a single shot follower unless there is a some other way to help keep the follower in place. Any suggestions would be greatly appreciated.
Robinhood
01-30-2021, 07:57 PM
Stagger feed or Center feed?
culpeper
01-30-2021, 10:57 PM
Center feed
GaCop
02-01-2021, 08:31 AM
Sans a center feed magazine, I used just a bit of Quick Set J&B Weld on the front and rear of the single shot follower and it has been working fine for 5 years now.
jpdown
02-01-2021, 08:39 AM
I’d order a single shot ramp from Sharp Shooter Supply. Then you won’t need a magazine box.
culpeper
02-01-2021, 08:50 AM
Is it long enough so it doesn't drop into the magazine inlet?
jpdown
02-01-2021, 01:07 PM
Yes. Perfect fit. You’ll like it better than the magazine installed single-shot version. Cartridge lines up and feeds correctly every time. l put a drop of epoxy at the rear as an added precaution.
culpeper
02-01-2021, 02:01 PM
Thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.