Long action feeding question

[KMAY]

Does anyone know if i can get a 223ai to feed from a long action SF action?

[tacticalj]

I'm no expert, but I don't see why not. As long as you can find the bolt face you need. The mag well would be the biggest issue that I could see, as i'm not sure if you can find a 223 mag well. Never tried it, but I suppose you could.

[KMAY]

I have a a 223 bolt head already.

I am not to familar with SF actions. How do the magboxes attach to the action?

[GaCop]

Stagger feed actions have the mag box attached with tabs on the box that fit machined slots in the bottom of the receiver. I'm waiting on a 223AI barrel from Sinarms that I will be using on a 110 staggerfeed action. I'm going the single shot follower route due to the use of long seated 80 and 82 grain Bergers.

[KMAY]

Thats not a bad idea but i was hoping hoping to make a repeater to use for coyote hunting. I may just stick to the long action.

Does anyone know if a 22-250 will feed form a 30-06 box?

[tacticalj]

Now that would be a good trick! The single shot follower would eliminate the question of whether or not it would feed. I'm pretty sure that the 22-250 is shorter than the 30.06 so it should. Again I'm no expert, but if memory serves it should work just fine.

As was previously stated, a staggerfeed mag box attaches to the action. You would just need to get a single shot follower.

[moecarama]

I just change a clip fed 111 30-06 to a stagger feed box on a BVSS stock & picked up a Score-High single shot from MIdway Ifit is a center feed check with Sharp Shooter Supply for their single shot follower.