Help re Barrel Specs

[Vartarg]

I’m shooting a Savage 110 Elite in 6 Creedmoor for 300 and 600 yard bench rest....have about 1000 through the barrel and I’m thinking long term about the next barrel. I may end up getting a prefit from Northland, but also am considering one from Kreisler or C-Caliber.

what size is the shank on a 110 barrel?

Thanks,

George

[celltech]

Looks like the large shank from pictures?

https://www.savageshooters.com/content.php?127-Savage-Barrel-Shank-Sizes#:~:text=Standard%20barrel%20shank%20diameter %20on,nut%20wrench%20will%20still%20fit.

[Robinhood]

I'm on the same page as Celltech. If you go to that link you will find this picture that gives you the length of the nuts for the 2 different nuts for the 2 shank sizes. http://www.savageshooters.com/attachment.php?attachmentid=619&d=1552021069&stc=1

You could always measure the barrel right in front of the nut. If it is greater than 1.055 you have a large shank. The nut length is good enough proof.

X caliber is good. Brux, Kreiger and Bartlien are all premium barrels.

[Vartarg]

Thanks....much appreciated!