PDA

View Full Version : bolt head looks like a used



charliephoo
12-22-2020, 05:34 PM
I ordered a bolt head from Gun shack. Here is what I get. It looks like a used. Has anyone ordered this bolt head before?

Newtosavage
12-22-2020, 07:14 PM
Does it work? If so, use it. It's not like they go bad.

ninner
12-22-2020, 07:46 PM
It’s called tested, not used.


Sent from my iPhone using Tapatalk

Robinhood
12-22-2020, 08:36 PM
Looks like some issues around the firing pin hole. It is probably new but I don't like the dings near the hole. What does it look like in person?

sharpshooter
12-22-2020, 08:54 PM
That's what new ones look like......

mnbogboy2
12-22-2020, 11:44 PM
That's what new ones look like......

+1

Here's one still in the sealed package.76597660

Texas10
12-22-2020, 11:56 PM
Do you have an ultrasonic cleaner? If not, SS wet pin tumbling should take the polishing compound off, if that's what it is. Hard to tell in the photos.

I polish the bolt face by applying some double stick tape to a spent cartridge and then some 400 or 500 grit W/D. Spin against the face gradually going to higher grits until you have the finish you want.

Fordoldfart
12-23-2020, 12:21 AM
I think it is new. There is no primer ring around the firing pin hole. If it is from Savage then that’s about what I would expect. They don’t clean up anything very well any more.

Newtosavage
12-23-2020, 11:35 AM
Clean the heck out of it and then after one trip to the range, it will look exactly like that. LOL

IOW - don't sweat it.

strut64
12-23-2020, 09:13 PM
Probably heat treated or case hardened.