Anthony21078
11-01-2020, 10:14 PM
Greetings. I purchased a 111 Trophy Hunter 30-06 over a year ago and left the standard Nikon 3-9x40 scope on the rifle. I zeroed at 100 yards with Winchester deer season 150gr making 1" groups. I have been out on a several deer/coyote hunts typically up to 200 yards and have been very happy with the rifle. I have a new property that I hunt now and there are some large open fields upwards of 400 yards. I had deer in the cross hairs at 350 yards and I wasn't too happy looking through the Nikon scope so I didn't bother taking the shot.
I am upgrading to a Leupold vx-3i 4.5-14x40 and Leupold rings. Need a little help on which type of rings to buy. The savage has the rail with weaver style rings. I am undecided on whether or not to leave the rail (or swap to a Leupold rail) and buy Leupold prw2 high rings OR remove the rail and use leupold backcounty medium rings. These two options and sizes are what came up when putting the rifle model into the Leupold mount finder on their website.
The specs state that both mounts are basically identical in height at 1.08". If I use the backcounty style mounts, is it safe to say the mounts will sit a bit lower then the prw2 rings because there is no rail? Or does the base of the backcounty mount take up the space that the rail provides? As it sits, I am happy with the height of the scope and would like to keep the new height as close as possible.
Does anyone have the specs for the standard rings? Anyone use either of these Leupold mounts on their Savage?
https://www.leupold.com/scope-mounts/prw2-30mm-high
OR
https://www.leupold.com/scope-mounts/backcountry-savage-10-110-rnd-rcvr-30mm-med-2-pc-matte
https://i.postimg.cc/t7XQgwdR/20201101-204957.jpg (https://postimg.cc/t7XQgwdR)
https://i.postimg.cc/WFwBnwVP/backcountry.jpg (https://postimg.cc/WFwBnwVP)
https://i.postimg.cc/QKNRnKNK/prw2-high.jpg (https://postimg.cc/QKNRnKNK)
I am upgrading to a Leupold vx-3i 4.5-14x40 and Leupold rings. Need a little help on which type of rings to buy. The savage has the rail with weaver style rings. I am undecided on whether or not to leave the rail (or swap to a Leupold rail) and buy Leupold prw2 high rings OR remove the rail and use leupold backcounty medium rings. These two options and sizes are what came up when putting the rifle model into the Leupold mount finder on their website.
The specs state that both mounts are basically identical in height at 1.08". If I use the backcounty style mounts, is it safe to say the mounts will sit a bit lower then the prw2 rings because there is no rail? Or does the base of the backcounty mount take up the space that the rail provides? As it sits, I am happy with the height of the scope and would like to keep the new height as close as possible.
Does anyone have the specs for the standard rings? Anyone use either of these Leupold mounts on their Savage?
https://www.leupold.com/scope-mounts/prw2-30mm-high
OR
https://www.leupold.com/scope-mounts/backcountry-savage-10-110-rnd-rcvr-30mm-med-2-pc-matte
https://i.postimg.cc/t7XQgwdR/20201101-204957.jpg (https://postimg.cc/t7XQgwdR)
https://i.postimg.cc/WFwBnwVP/backcountry.jpg (https://postimg.cc/WFwBnwVP)
https://i.postimg.cc/QKNRnKNK/prw2-high.jpg (https://postimg.cc/QKNRnKNK)