308 win build off a single shot 12 6br donor

[mikeinco]

so moving on from the 110 forum and my question here on bolts,
tomorrow i will fit the bbl'd action to the stock...new bbl is not a savage profile and
i am using a savage / hs precision stock. stock is bedded so once the bbl is clearenced we are
good to go.

[Ted_Feasel]

so moving on from the 110 forum and my question here on bolts,
tomorrow i will fit the bbl'd action to the stock...new bbl is not a savage profile and
i am using a savage / hs precision stock. stock is bedded so once the bbl is clearenced we are
good to go.What barrel you going with?

Sent from my SM-N975U using Tapatalk

[mikeinco]

it is a lilja mk13 mod 7
a 300 win mag bbl blank 1/10 twist that can finish at 26". i am only doing 24"
i really like my current on on my mk13 clone.


What barrel you going with?

Sent from my SM-N975U using Tapatalk

[Ted_Feasel]

it is a lilja mk13 mod 7
a 300 win mag bbl blank 1/10 twist that can finish at 26". i am only doing 24"
i really like my current on on my mk13 clone.I've heard and read good things about lilja.. have not tried one.... yet:)

Sent from my SM-N975U using Tapatalk

[mikeinco]

yes they are the sole source for the mk 13 (300 win mag) sniper rifle bbls
now a multi service tool. was just SEAL's

I've heard and read good things about lilja.. have not tried one.... yet:)

Sent from my SM-N975U using Tapatalk

[mikeinco]

stock is clearanced, just took a 1/2 hour or so to clear a bbl section slightly bigger than the original.
now to thread the bbl for the suppressor mount/break.
will need a paying third party to post some pics

[Ted_Feasel]

stock is clearanced, just took a 1/2 hour or so to clear a bbl section slightly bigger than the original.
now to thread the bbl for the suppressor mount/break.
will need a paying third party to post some picsYou can use imgur to post pics

Sent from my SM-N975U using Tapatalk

[Ted_Feasel]

stock is clearanced, just took a 1/2 hour or so to clear a bbl section slightly bigger than the original.
now to thread the bbl for the suppressor mount/break.
will need a paying third party to post some picsJust upload to imgur then copy the link and paste it here

Sent from my SM-N975U using Tapatalk

[mikeinco]

in 2020 there is no reason to be using 3rd party services to post a pic.
this is the only site i use with this issue, all other sites allow direct posting.
we have been thru this, i am not changing for one site.

Just upload to imgur then copy the link and paste it here

Sent from my SM-N975U using Tapatalk

[charlie b]

It is not cheap and is time consuming to run even a small forum.

Yes, sites like this that are small and run by one individual can be 'cheap' with server space. If you want you could offer a donation and maybe the administrator can afford to get some more server space.

If not, then you'll have to do with not posting pictures.

[Ted_Feasel]

It is not cheap and is time consuming to run even a small forum.

Yes, sites like this that are small and run by one individual can be 'cheap' with server space. If you want you could offer a donation and maybe the administrator can afford to get some more server space.

If not, then you'll have to do with not posting pictures.I have to agree with that.. I run a Linux server that streams music that anyone can access from their web browser and I host it in my home. The time and buying hard drive for my raid is not cheap. I run raid 0 with 3 one terabyte SSDs with striping so if one disk goes bad I can pop it out, push in the new SSD and it rebuilds the data on any disk that goes bad with the parity strip that's across the 3.
Its all heavy music but its:
http://162.203.195.117:8000/stream

Sent from my SM-N975U using Tapatalk

[mikeinco]

so muzzle threading went very well. timed to the brake with no shims.( i have a 9" suppressor for this project)
so inspect bbl exterior for no major dings or scratches , then off to houston unlimited for SBN treatment.

[Ted_Feasel]

so muzzle threading went very well. timed to the brake with no shims.( i have a 9" suppressor for this project)
so inspect bbl exterior for no major dings or scratches , then off to houston unlimited for SBN treatment.You definitely peaked my curiosity on lilja.. always used shilen and criterion with excellent results but I want to try a lilja on my next build maybe

Sent from my SM-N975U using Tapatalk

[Robinhood]

Its all heavy music but its:
http://162.203.195.117:8000/stream

Sent from my SM-N975U using Tapatalk


LOL...answers many questions in my head

[mikeinco]

my mk13 has made 3 consecutive hits at 1790( just past a mile). single shots, no sighters, aprox 1/2 hr apart.
aprox 1.5 moa steel plate.
i like krieger best, need to try a few others off the br list.

You definitely peaked my curiosity on lilja.. always used shilen and criterion with excellent results but I want to try a lilja on my next build maybe

Sent from my SM-N975U using Tapatalk

[mikeinco]

i picked up 200 lapua 308 win palma brass today. small primer pocket/small flash hole
this is not a tight neck chamber but will uniform the necks some where around .014
weight sort and done

[Ted_Feasel]

LOL...answers many questions in my headYep I was raised on the heavy stuff but I also love classical... about only music i don't do is country but even that I have found a few songs I like:)

Sent from my SM-N975U using Tapatalk

[mikeinco]

well the bbl and recoil lug go out to houston unlimited for sbn processing.
should be back in 10-14 days

[Ted_Feasel]

well the bbl and recoil lug go out to houston unlimited for sbn processing.
should be back in 10-14 daysI've been toying with the idea of building a single shot 308 target pistol. I shot one once I it was definitely a handful

Sent from my SM-N975U using Tapatalk

[mikeinco]

I have been scratching my head for several days on how to get the reciever color to match the stock(flat black) and the SBN treated bbl( also flat black)
the stock is bedded which means no coating on the bottom of the receiver. i opted to oven bake some rattle can epoxy..but no one had flat black. i did a light 400 grit sand...got rid of the trigger safety lettering, tapped off the bottom and the in side, the spots where the base sits on the receiver. applied one light coat and baked for 2hr at 170, light steel wool buff and another light coat and another 2 hours of baking. looks ok, only time will tell how it lasts.