Savage 110 t

[Larrykwebb]

Just purchased this rifle in 6.5 creedmoor.
Has anyone done a load workup with 140 eld m with h4350...
Trying to cut down chasing a load since I'm goin Wednesday to break it in.
I will also be shooting my new howa mini action in 6mm arc... should be a interesting day...

[wbm]

_.
(https://rifleshooter.com/2018/07/6-5-creedmoor-load-development-hornady-147-eld-with-h4350-and-h4831sc/)

[Shooter0302]

Good thing you have at least 2 rifles to "test" in Texas heat, so one can be cooling, while you test with the other.
As to your 143 ELD M question, simple answer is, factory rifles are a lot like women, no two like the exact same thing. I would start at 40.3 gn of H 4350 and work up 0.3 gn. at a time.

[tmalcombe]

I know I'm way late on this post. But if you haven't nailed down a load yet..I'm using 40.6 grains of H4350 with a seating depth of 2.806. Works wonders in not on mine, but all my buddies' rifles too.

[Larrykwebb]

I know I'm way late on this post. But if you haven't nailed down a load yet..I'm using 40.6 grains of H4350 with a seating depth of 2.806. Works wonders in not on mine, but all my buddies' rifles too.
What grain bullet?