PDA

View Full Version : Savage 10 308 FCP


Pages : 1 [2]
Ted_Feasel
06-21-2020, 12:03 PM
There are a view little caviar it's that you cannot overlook or it will run the barrel. One for instance is some chatter marks or tooling marks in the barrel may be so deep the if you laugh them out all the way you will have over board your die amatter of your for another 1 is that you have to U slow even and I mean very even poll why you're pulling that plug with the lapping compound through so you have to find that medium where you've gotten the tooling marks out that you can and the tight spots out without running the bore diameter of the barrel

Sent from my SM-N975U using TapatalkGod damg speech to text screwed that all up

Sent from my SM-N975U using Tapatalk
RG31
06-22-2020, 03:32 PM
If you don't mind, make sure you tell the potential buyers that the barrel is a POS or otherwise you may get a reputation for being the same.

When the new barrel gets hear and installed, I will sell it for $25.00 plus S/H.
RG31
06-22-2020, 03:33 PM
If the price is right I'll buy it, hand lap it and probably have a tac driver:) ive hand lapped a few savage barrels and bca barrels with remarkable results.. its a pain to do but its worth it alot of times.

Sent from my SM-N975U using Tapatalk

How does $25.00 plus S/H sound?
Robinhood
06-22-2020, 07:46 PM
I think that is more than fair. 45 for a nearly new barrel slightly damaged
Ted_Feasel
06-23-2020, 04:38 PM
How does $25.00 plus S/H sound?What profile barrel? Large shake also I assume?

Sent from my SM-N975U using Tapatalk
RG31
06-23-2020, 11:26 PM
What profile barrel? Large shake also I assume?

Sent from my SM-N975U using Tapatalk

This is the standard shank barrel with the Varminter/tactical contour. Barrel diameter at the muzzleloader is .835.
Ted_Feasel
06-24-2020, 06:38 AM
This is the standard shank barrel with the Varminter/tactical contour. Barrel diameter at the muzzleloader is .835.Right on.. i will take it off your hand a week from this friday if you still have it

Sent from my SM-N975U using Tapatalk
RG31
06-24-2020, 09:12 AM
Right on.. i will take it off your hand a week from this friday if you still have it

Sent from my SM-N975U using Tapatalk

I will wait till the Criterion barrel arrives. I do not like to take something apart in till I have all required parts. Rest assured, it will go nowhere.
Ted_Feasel
06-24-2020, 11:38 AM
I will wait till the Criterion barrel arrives. I do not like to take something apart in till I have all required parts. Rest assured, it will go nowhere.I'm the same way, no worries:)

Sent from my SM-N975U using Tapatalk