View Full Version : Newbie--Brand new out of the box 110 tactical .308 Can't get the bolt in??
PreachermanAR
06-05-2020, 09:53 PM
It's like the round button on the bolt is forward and i can't get it to move into position...Please help
PreachermanAR
06-05-2020, 10:17 PM
Got it...thanks youtube
Orezona
06-05-2020, 10:47 PM
Classic for first 2 posts!
Dave Hoback
06-06-2020, 06:45 AM
Yes, having a thick, heavy wood bench is a good thing to have to manually set the firing pin by pushing the cocking piece pin(round button) against. I still remember figuring that out for the first time. :smile-new:
Orezona
06-06-2020, 11:17 AM
I think I used youtube as well.
want2ride
06-06-2020, 01:57 PM
Welcome!
Youtube has got me through a few tricky car repairs too! Love it!
PreachermanAR
06-07-2020, 01:01 AM
I couldn't figure out how to reset it. Finally found something. I knew something was wrong
PreachermanAR
06-07-2020, 01:03 AM
Oak top work table was out in the shop...used the wife's cutting board...lol
Dave Hoback (http://www.savageshooters.com/member.php?39764-Dave-Hoback): "Yes, having a thick, heavy wood bench is a good thing"
Oh gee thanks Dave!
Not all of us are gazillionaires like you ya know?! We have to use a stick and a door jam. http://www.savageshooters.com/images/smilies/cool.png
Stockrex
06-08-2020, 10:47 AM
Lol, been there done that, welcome to the savage-ry
mnbogboy2
06-09-2020, 09:33 PM
My method, remove the BAS completely, the put it back in with only 2 turns, now most likely you can set the cocking pin with your thumb (or very light pressure with the door jamb or bench top). Tighten the BAS, done deal.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.