View Full Version : Axis/Edge Firing Pin Spring???
Nezter
05-12-2020, 05:23 PM
Hello!
I'm restoring a Savage Edge 243 Win. I discovered it is the same as the "Axis" and on this site today I learned that the old one piece firing pin spring was at one point modified to a 2 spring system. It seems that no matter where I look, I am unable to find the spring. Do any of you know where I can purchase a replacement? Thank you! Nezter
sharpshooter
05-12-2020, 11:02 PM
Do you actually have the original spring, or are you just looking for a the updated version?
Nezter
05-13-2020, 01:23 AM
I do have the original and yes, I'm looking for the updated version. The original is defective.
Nezter
05-13-2020, 10:59 AM
I ended up having a gunsmith call and order the 3 piece spring from Savage.
GaCop
05-21-2020, 07:44 AM
I ended up having a gunsmith call and order the 3 piece spring from Savage. I did the same as Savage won't sell you the spring. Mine started to act up so I had to replace it. Best to store the Axis uncocked so the spring doesn't take a set.
prdatr
05-21-2020, 11:37 AM
Would that be with the bolt open?
sharpshooter
05-21-2020, 06:50 PM
They won't take a set, and besides it's still compressed when de-cocked.
Camar068
06-26-2020, 12:23 PM
Someone is selling them on ebay for $19 shipped. I got a set last month for my creedmoor.
CaptnC
06-29-2020, 05:22 PM
I tried to do a search on Ebay and came up empty handed.
Could give us a link...or PM me a link?
I bought a couple of the Axis bolt lift kits. The instructional video was with the one piece spring. So I "wing'd it" with a 2piece spring. He never mention the bearing set would not fit inside rear nut that holds the bolt together. At any rate I cut the back spring, well you need to cut the front spring. Which I really didn't want to do because the bearing is exposed. So now I need a rear firing pin spring.
Camar068
06-30-2020, 09:54 PM
send the username below a message on ebay. He sold three of them but looks like he's out of stock now.
diduwantitbadenough
CaptnC
07-03-2020, 11:33 PM
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.