View Full Version : Question on Bass Pro Shop 110's
Shooter0302
04-19-2020, 12:20 PM
Looking at one of the ones on sale for a bbl. swap. These come with a 4 Rd DBM. My question is will one of the 10 Rd. DBM Mags. work with rifle ??
https://www.basspro.com/shop/en/savage-arms-model-10t-sr-tactical-bolt-action-rifle-with-threaded-barrel
hamiltonkiler
04-20-2020, 07:00 AM
Yes it will work. And why dismiss the barrel?
My 10T shot sub MOA all day.
Sent from my iPhone using Tapatalk
want2ride
04-20-2020, 10:55 AM
I agree, make sure you shoot it as it is before you swap the barrel. after about 60 rounds mine went from a 7/8 moa gun to just above a half. They really are a nice rifle as they come.
jkv45
04-20-2020, 10:59 AM
I agree, make sure you shoot it as it is before you swap the barrel. after about 60 rounds mine went from a 7/8 moa gun to just above a half. They really are a nice rifle as they come.
Did you do anything special as far as break-in?
want2ride
04-20-2020, 11:26 AM
nope, just rounds down range. I think i cleaned it before i shot it, but after that i was looking to reach copper equilibrium before i worked up a load. I just happened to get a smoking deal on a 12 LRP in 6.5 Creedmoor, so it never saw more than 200 rounds of all factory ammo. It seemed to like the 143 Precision Hunter and Winchester match 140 the best, i sold it to my brother-in-law because it shot so good, that i wanted it to go to a good home. After my first couple rifles that i did the one shot- clean for 5 rounds then 5 shots-clean for another 20 and they never shot any better than the ones that i just cleaned when i first got them and then just put rounds down range till accuracy dropped off. I have a bunch of really good shooting guns, and don't do break-in anymore.
jkv45
04-20-2020, 02:14 PM
^ Thanks.
Bill2905
04-20-2020, 05:30 PM
I have one of these in 223 Remington although I recently reconfigured it into a BVSS stock and sold the Accustock. Once broken in, it has consistently shot 1/2" - 3/4" groups at 100 yds with hand loads and quality factory loads. Occasionally, it will shoot even better when I do my part.
s3silver
04-21-2020, 04:00 AM
Agreed with what the others have said. My 308 hog hunter shoots so well I left the barrel alone.
Shooter0302
04-21-2020, 12:45 PM
Will the 10 Rd. Mag. fit ? "Yes", THANK YOU.
WHY ? My purpose is to build a 6 Dasher or 6 GT for my grand daughter to "clang steel" at 5,6,7 & 8 hundred yds. Using a Bbl. that doesn't require 10+ Hr.'s of cleaning to get clean, like our 110 T OME 6 CM bbl.does
Robinhood
04-21-2020, 08:09 PM
6xcii
Shooter0302
04-21-2020, 11:09 PM
6xcii
That or a 6 x 47L.
Friday will tell how I-4064 works in the 6 CM
charlie b
04-22-2020, 08:03 AM
For those ranges I will be going with a 6BRA, but I am not competing either. Dasher seems to be the current favorite. Any of the cartridges mentioned will do.
All depends on if you want the extra velocity or not.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.