Feeding a 6 BR from a Tactical DBM ?

[Shooter0302]

Has anyone tried this ? Any problems or what is the cure ? I's herd of "inserts" Do they work and where do you get them ??

Thank you

[Bill2905]

MDT sells a 12-round short action AICS pattern magazine for the 6 BR. I have no experience with it.

mdt-metal-magazines-short-action.html (https://mdttac.com/us_en/mdt-metal-magazines-short-action.html)

[Shooter0302]

I could have bet that a while back there was talk about changing Bbl's to a 6BRA , 6 Dasher or other short rounds, and a few made mention of using inserts ,??
I could be wrong,lucky I live with 2 English Bulldogs , so I don't get corrected very often

[Whynot]

I feed a 6br with a regular 308 mag- and I have no issues, but that is on a 700 action. It is also using the 107smk- so that makes for a longer bullet. If I was shooting 80 grain bullets I would use the MDT mags, even though they are very pricey.

If you do a youtube search for 6br mag fix it will bring up reviews of the mag inserts. Some work good and some have some binding problems.

[NicfromAlabama]

You may know, but there is also a stainless Savage factory magazine for the 6 BR. I bought one when I built my 6 BR. It holds 3. Most magazine like .308 will hold and feed 2 rounds. Any more and they get bound up in the wider magazines. Single feeding is quite easy due to it being a stubby round.

[Bill2905]

A SSS single shot loading ramp would solve your issue if you don't need your rig to be a repeater. I have several, they work well, and are easy to install or remove.