View Full Version : Axis Bolt Disassembly- Keyed BAS?
mattri
03-17-2020, 06:33 PM
7001
Haven't seen one of these before, I'm used to the regular allen head BAS.
Just need a special socket?
mattri
03-17-2020, 06:35 PM
7002
Another look.
Robinhood
03-17-2020, 07:52 PM
Have you tried decocking the cocking piece pin? It looks like the cocking indicator projecting into the key hole?
mattri
03-17-2020, 08:15 PM
7003
Sorry to not be clear. Most Savage bolts have a BAS with an allen head as shown in the picture above.
This Axis has a BAS with an odd keyed BAS.
Who has seen this?
What tool are you using to remove it?
sharpshooter
03-18-2020, 01:17 AM
The Axis BAS uses a 1/4" allen wrench just like all the other models. You must de-cock it to get the wrench in. The firing pin sticking out is just a cocking indicator, and your particular firing pin seems to be a screw up from the factory, as they have a slot for the tail of the spring, but it does not extend that far. Once you get it out, you'll see what I mean.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.