110 Varminter build

[NDTOO]

I posted a few weeks back wanting help to ID a stock and turns out it ended up being a 110 Varminter from the 80's. I found the stock on Numrich Gun Parts. It was just listed as a 110 stock with a heavy barrel channel. It was pretty crusty when it arrived. It even smelled kind of musty but it cleaned up nicely after sanding it all down. I installed aluminum pillars and bedded the action and then finished it by spraying several coats of tung oil and sanding in-between coats. I have always wanted to build a 220 Swift so I have a Criterion on order from NSS. This is a donor 22-250 barrel just so I could get the stock work done. I'm excited to get the barrel and try it out!
​https://i.postimg.cc/4Y71kDCC/20-2-9-Savage-110-V-2.jpg (https://postimg.cc/4Y71kDCC)
https://i.postimg.cc/k69NSD29/20-2-9-Savage-110-V-3.jpg (https://postimg.cc/k69NSD29)
https://i.postimg.cc/Lh9B6Yd3/20-2-9-Savage-110-V-5.jpg (https://postimg.cc/Lh9B6Yd3)
https://i.postimg.cc/56kmrxRq/20-2-9-Savage-110-V-1.jpg (https://postimg.cc/56kmrxRq)

[yobuck]

Nice classic looking stock. Looks similar to an older Rem 40x stock.
Just a thought but i always place or move the rear swivel stud close to the pistol grip so it dosent hang up on the rear bag.

[DJinAC]

Looks good. I am going to have to start a build thread of my own.

[CAPT BEACH]

that is a beautiful STOCK/RIFLE

[pdog06]

Very nice job! My first Savage was a 110 Varminter in 22-250, so I kinda have a soft spot for those stocks.