View Full Version : Mark I/II/93R: torque settings
Gary Jordan
02-05-2020, 10:59 AM
Any body know what the recommended torque settings should be on the stock assembly and trigger/magazine screws for the Mark 1 FVP (composit stock)
hamiltonkiler
02-05-2020, 10:15 PM
Start with 25# front and back. Work the front one to 40# if it tunes better there. If not back it back to 25#
Sent from my iPhone using Tapatalk
ice tea
02-05-2020, 10:56 PM
I been driving myself crazy lately on what 17 to buy. i was gonna get the b17, but all the reading/research i been doing, i'm not sure savage is the way to go w/ a 17, as too many inconsistent stories. anyway, here is a link i had put in my favorites list on my laptop. post #17, talks about it some.
https://r.search.yahoo.com/_ylt=Awr9BNYgfzteZvIAxpdXNyoA;_ylu=X3oDMTByb2lvbXV uBGNvbG8DZ3ExBHBvcwMxBHZ0aWQDBHNlYwNzcg--/RV=2/RE=1580986272/RO=10/RU=http%3a%2f%2fforum.accurateshooter.com%2fthread s%2f17hmr-rifle-choice-s.3960800%2f/RK=2/RS=N6xLsuhQ9lQMOLYv_2SGE_ktVzY-
jkv45
02-06-2020, 05:38 PM
I've not seen any specifics on the Mark I, but from what I have seen, Savages tend to shoot best with the screws torqued in the 25 to 35 in/lbs range.
This article covers how Team Savage does it - https://www.accurateshooter.com/technical-articles/savage-action-screw-torque-tuning/
Gary Jordan
02-07-2020, 11:42 PM
Would that be inch pounds ?
Gary Jordan
02-07-2020, 11:43 PM
Thanks
Gary Jordan
02-11-2020, 11:29 AM
Does the 25-35 in/lbs also apply to wood stocks or just composite ?
jkv45
02-11-2020, 12:20 PM
Does the 25-35 in/lbs also apply to wood stocks or just composite ?
That's just a general number that I've heard tossed out over they years for Savage rifles in general.
A good place to start, and should be a safe number to avoid damage to a wood stock, but some like to go higher with testing.
Gary Jordan
02-11-2020, 10:35 PM
That's just a general number that I've heard tossed out over they years for Savage rifles in general.
A good place to start, and should be a safe number to avoid damage to a wood stock, but some like to go higher with testing.
O.K.-Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.