PDA

View Full Version : Looking for recommendations on stock



CJP1
01-31-2020, 05:24 PM
I have a Savage short action with 4.275" action screw centers, large shank, staggered feed, blind mag with factory 270 WSM sporter barrel. I'm looking for recommendations for a pillar bedded light weight hunting stock that won't break the bank. Any and all help would be appreciated.

CJP1
02-08-2020, 08:19 PM
I found a stock on another forum.

Jcalloway
02-12-2020, 02:26 PM
What forum and what did you end up going with?

CJP1
02-12-2020, 07:21 PM
The stock that I'm getting is a synthetic Savage stock. The person with the stock is sending it to me for free of charge. I only have to pay for the shipping. I couldn't pass up that deal. The forum was the Modern Muzzleloader forum. Maybe in the future I'll restock with an aftermarket stock.

nksmfamjp
02-13-2020, 07:12 PM
Wait until you get the stock to make that call!:o

CJP1
02-14-2020, 02:36 PM
nksmfamjp,
I don't understand your reply.

GaCop
02-20-2020, 07:31 AM
nksmfamjp,
I don't understand your reply.

Another factory plastic stock could very well be as bad or worse than your original stock. The factory "Tupperware" stocks are not the greatest.