Toads
01-29-2020, 12:04 AM
Rebuilding my old 110 after being torn apart for about 10 years. I thought all my bolt components were in one spot but was mistaken.
It seems 2 of the parts are going to be impossible to find so I have decided to make them.
I have already started making the cocking sleeve but if anyone has a fix on the length would greatly help. The blank I made is 1.25" long, and I decided to go with 4140ht steel. Again if anyone knows the overall length I would appreciate that info.
The other part I'm missing is the bolt assembly screw, I figured I can simply machine a threaded flange screw that works. Unless anyone has a fix on where I could find one, I've checked as many online places I can.
Thanks in advance
It seems 2 of the parts are going to be impossible to find so I have decided to make them.
I have already started making the cocking sleeve but if anyone has a fix on the length would greatly help. The blank I made is 1.25" long, and I decided to go with 4140ht steel. Again if anyone knows the overall length I would appreciate that info.
The other part I'm missing is the bolt assembly screw, I figured I can simply machine a threaded flange screw that works. Unless anyone has a fix on where I could find one, I've checked as many online places I can.
Thanks in advance