View Full Version : Nitrating a barrel
22 Mag
01-24-2020, 05:51 PM
Two questions
1. Would you nitrate a CBI barrel after you cleaned it But have not shot it yet? (OR) after you have cleaned it, shot it and then cleaned it again?
2. If you have nitrated a barrel before would you do it again?
Thanks
22 Mag
Robinhood
01-24-2020, 06:47 PM
I think the correct term is nitride or nitriding.
Once a barrel has been nitrided it cant be set back or machined due to the surface hardening.
I would seriously consider who would do the work.
Texas10
01-29-2020, 12:02 AM
According to CBI's website, they sell match grade SS barrels with nitrided finish.https://criterionbarrels.com/media/chrome-lined-vs-salt-bath-nitrided-barrels/
Some further reading for those who are curious about this process.https://www.shootingillustrated.com/articles/2017/12/30/the-pros-and-cons-of-nitride-barrel-finishes/
https://www.youtube.com/watch?v=jiegZyhd5l0
22 Mag
01-30-2020, 10:06 PM
Thanks for the input. I think I will have my next barrel from CBI nitrided when I buy it.
22 Mag
tomme boy
02-02-2020, 06:18 PM
You can rechamber SOME barrels that have had a nitride coating. It depends on who did it. If it was done with a QPQ then it will be very difficult to rechamber. If it is just a normal Q treatment then it will be easy to cut it away. A lot of barrels out there today are not QPQ.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.