Accutrigger On 10BA Stealth

[deserttrans]

Does the 10A Stealth have the trigger that can be adjusted below 2#s? I believe, I have read the VT series does and was wondering if the Stealth did. Thanks

[AllenOne1]

I don't think you will get the Stealth trigger lower than 2#s without messing with the springs. I have a GRS and the lowest I could get was just over 2#s. I then played with the springs and got it down to 1.5#s which is working pretty good for me.

[Bill2905]

My 10 BA Stealth will not adjust that low

[deserttrans]

Thanks for the information.